CARSTANDS
#1
CARSTANDS
Hi
Its time to up date my carstand.i have a few in mind that i like,but i would like to hear and share your views on Carstands and which you prefer and why,
my choices so far are as follows but in no particular order.muchmore,integy with fan.
any ideas what good out there?.
Its time to up date my carstand.i have a few in mind that i like,but i would like to hear and share your views on Carstands and which you prefer and why,
my choices so far are as follows but in no particular order.muchmore,integy with fan.
any ideas what good out there?.
Last edited by pug 205 gti; 04-30-2008 at 11:12 AM.
#3
Tech Elite
iTrader: (32)
TC3 foam car stand by Trinity - if you can find one, it is a great stand. I have the MM stand and it's kinda small for working on TC's.
#4
#6
Thanks for recommending the foam stands.unfortunatly they just dont appeal to me.
The much more stands ive been looking at are the buggy ones which are deeper than the touring car ones.
I would really like a blue tamiya one.here is the "but" again. I can only find the red ones?.
The much more stands ive been looking at are the buggy ones which are deeper than the touring car ones.
I would really like a blue tamiya one.here is the "but" again. I can only find the red ones?.
#8
I have an old arcrylic folding one I think is from Racers Edge... Don't care for it, but it works for off road nicely... I have the nice one from Ofna with the pivoting top, comes anodized in many colors including Tamiya-ish blue... don't care for it. I only use it for building shocks. If you use it for building shocks and working on your car at the same time, if you spin your car, it will knock all the shocks off the stand.. I had a foam one, didn't care for it. I currently use my RPM pinion case most of the time, or if the car comes off the track a bit warm, I have a Trinity battery cooling stand. I know, it's foam, but for the times you need it...
I also like the short extruded aluminum ones. I have yet to run across one when I had a few spare nickels to rub together...
I also like the short extruded aluminum ones. I have yet to run across one when I had a few spare nickels to rub together...
#9
Tech Master
You are all thinking too hard. For on road cars, grab a 1 inch role of masking tape and use that!
Snowy.
Snowy.
#13
T.O.P. Racing car stand
Here's one from T.O.P.
Don't know why you would, but you can also mount it on the wall as a tool rack, and it has the shock holes
They come with rubber strips for the top and rubber feet for the bottom, and come in light blue, purple, red, black and gold.
Don't know why you would, but you can also mount it on the wall as a tool rack, and it has the shock holes
They come with rubber strips for the top and rubber feet for the bottom, and come in light blue, purple, red, black and gold.
Last edited by odpurple; 07-10-2008 at 07:43 PM.
#15
The new HUDY one is nice, just picked one up. When they were showing them at the toy fair they were claiming these were "custom" and you could get your name engraved on the top. I contacted Hudy and asked how you go about getting one engraved and they never got back to me.