Warpspeed Racing
#496
Tech Elite
Re: I am sold!
Originally posted by RCJohnny
As soon as I can stash a few bucks away (with out mamma finding out) I am buying one.
Howard...I think you need a new one, sell me yours!
Cya Friday
JOhn G.
As soon as I can stash a few bucks away (with out mamma finding out) I am buying one.
Howard...I think you need a new one, sell me yours!
Cya Friday
JOhn G.
#497
Tech Regular
Join Date: Oct 2001
Location: Orange County TrackMasters "The Home of R/C Champions"
Posts: 430
Howards car wasn't that fast! My car was just slow! Motor issues.
Maybe after 4th of July I will be able to purchase some motors and bring my qualifying status up a few spots but until then I will be basically powerless.
Stock Tubs are better!
Maybe after 4th of July I will be able to purchase some motors and bring my qualifying status up a few spots but until then I will be basically powerless.
Stock Tubs are better!
#498
Tech Elite
Originally posted by BendingCorners
Howards car wasn't that fast! My car was just slow! Motor issues.
Maybe after 4th of July I will be able to purchase some motors and bring my qualifying status up a few spots but until then I will be basically powerless.
Stock Tubs are better!
Howards car wasn't that fast! My car was just slow! Motor issues.
Maybe after 4th of July I will be able to purchase some motors and bring my qualifying status up a few spots but until then I will be basically powerless.
Stock Tubs are better!
Last edited by howard hudson; 06-24-2003 at 08:36 PM.
#500
Tech Elite
iTrader: (8)
Well, the results are in..........
I beat Brian, we were very very close, and brian broke on the second to last lap, i had about 2.5 secs at that time. (dogbone popped out) We were dicing for 2nd for like 4 minutes, we both made moves on eahc other cleanly, i think we need a round 2 for sure.
I beat Brian, we were very very close, and brian broke on the second to last lap, i had about 2.5 secs at that time. (dogbone popped out) We were dicing for 2nd for like 4 minutes, we both made moves on eahc other cleanly, i think we need a round 2 for sure.
#501
Tech Elite
Originally posted by Trinityracinnut
Well, the results are in..........
I beat Brian, we were very very close, and brian broke on the second to last lap, i had about 2.5 secs at that time. (dogbone popped out) We were dicing for 2nd for like 4 minutes, we both made moves on eahc other cleanly, i think we need a round 2 for sure.
Well, the results are in..........
I beat Brian, we were very very close, and brian broke on the second to last lap, i had about 2.5 secs at that time. (dogbone popped out) We were dicing for 2nd for like 4 minutes, we both made moves on eahc other cleanly, i think we need a round 2 for sure.
#503
Tech Master
Axiom5B, I had a bad problem of the dogbone popping out of the front right when I was running a composite diff. You can fix this by using steel(AE) or aluminum outdrives(Niftech, IRS, TiR). I highly recommend you use IRS's pin cushions on the shafts if you use aluminum outdrives, IRS sells the shafts with them pre-installed($15-retail) or you can buy them and install them yourself. I thought of another fix for this and that is use AE's 200mm shafts but they might too long, I don't know. Hope this helps.
Last edited by webspinner; 06-24-2003 at 10:50 PM.
#506
Tech Elite
iTrader: (5)
Ax, if you're going to run a spool, I wouldn't get IRS pin-cushions. Spools eat'm like candy. Niftech makes a product called swivels that are a lot more durable. I also heard another user say he used the Schumacher blades. Both greatly reduce wear on aluminum outdrives. The swivels won't come apart though under load. For Mod, I would invest in a set swivels. They're $20 for a pair. You really only need them up front. My .02
#509
Tech Adept
Axiom5B, sounds to me like you still did good even with a cast on. what is trinityracinnut running a demon or something else?