Csaari77

iTrader: (35)

I'll bring one of my F1s with me tomorrow to see how it does on the TCS tires.

Bigz84

iTrader: (24)

Myron, u have a pm

Thanks

Mechintosh

Myron,
Steve K will take care of his 2nd class tomorrow.
Cheers,

PROMODVETTE

iTrader: (70)

Can we switch VTA weight to 1378? There isn't enough room on my car to add 172 grams. Thanks!

nashrcracer

iTrader: (1)

http://www.maximum-velocity.com/tungstenplates.htm

http://www.maximum-velocity.com/pine...rby_weight.htm

mikel33

iTrader: (2)

just tape it to the roof....

PROMODVETTE

iTrader: (70)

I just stacked another body on top of the other and put it in the oven for a few min. Now I have 1 super thick and heavy body now.

mikel33

iTrader: (2)

there ya go. that's thinking outside the box.

Csaari77

iTrader: (35)

Just hang some off the back like an anchor.

mikel33

iTrader: (2)

I made a deck lid spoiler out of lead once. Worked like a charm.

biff85ta

iTrader: (13)

I think I have this sorted out. I found one one local. It is orange so I will probably just paint it up.

k_bojar

iTrader: (30)

i know the feeling..my TCXX need a TON of extra weight

NutDriver

iTrader: (30)

I made a lead chassis plate. Lowered the CG A LOT, but couldn't keep it from getting tweaked.

TWILL

iTrader: (12)

We just had a GREAT Tuning Haus Party at The Gate in Cleveland, and for F1 we ran 21.5 motor, speedo in the blinky mode wit no boost, Tamiya 1031 and Tamiya 1032 TCS Fronts/Rears as a spec tire with the inserts that come with the tires. These are the same rules that we will use at the Halloween Classic, they are simple and easy to tech!!!! The tires are easy to get and THEY WORK!!!!!

waltss2k

iTrader: (7)

The thing with the TCS tires for me is that on a high bite track I traction rolled and had to go to kit tires. So what's the trick to not traction roll with the TCS tires