Hpi Pro 4
#1366
Tech Champion
iTrader: (42)
checkout rczone.net.
they have the complete A Main from the DHI Cup....Hara rolls it on the first lap and comes back to win in the last 30secs!
the video taken is pretty good...if you look closely you'll see hara's black/white/pink paint scheme...besides that he's the one turning crazy lap times faster then anyone else on the track.
they have the complete A Main from the DHI Cup....Hara rolls it on the first lap and comes back to win in the last 30secs!
the video taken is pretty good...if you look closely you'll see hara's black/white/pink paint scheme...besides that he's the one turning crazy lap times faster then anyone else on the track.
#1367
Originally posted by Kingcrab
Pro4 option : Titanium input shaft
Pro4 option : Titanium input shaft
#1368
Ran my Pro4 for the firstime tonight on our carpet track with stock box setup with foams.
Was really impressive for stock setup. Seems a little soft for foams but is very forgiving and easy to drive. Car has a very good sweet spot straight from box. Things are only going to get even better from here.
Was really impressive for stock setup. Seems a little soft for foams but is very forgiving and easy to drive. Car has a very good sweet spot straight from box. Things are only going to get even better from here.
#1369
rc-zombies,
did you get a chance to run the car this past weekend?
how did it go?
did you get a chance to run the car this past weekend?
how did it go?
#1370
Tech Champion
iTrader: (9)
Originally posted by racer
rc-zombies,
did you get a chance to run the car this past weekend?
how did it go?
rc-zombies,
did you get a chance to run the car this past weekend?
how did it go?
One of the best handling car I've everdriven right out of the box.
Has lots of corner and exit speed... lots of steering. It goes where you point it. I Use the stock setting...will only get better from here... I think the stock sway bars are too thick...waiting for the 1.2 and 1.4mm sway bars to arrive sometime next week. Will try Hara asphalt set-up and see how it goes... First Club race is not 'til March..so I've got some time to get the car dialed. Will try to do some more practice sessions this sunday....
btw...I was suprised that the Losi Lexus IS200 handled very well... I may have to get more...haven't tried the new HPI Aero STratus or Mazda 6 yet...hopefully this weekend....
#1371
Originally posted by rc-zombies
I think the stock sway bars are too thick...waiting for the 1.2 and 1.4mm sway bars to arrive sometime next week.
I think the stock sway bars are too thick...waiting for the 1.2 and 1.4mm sway bars to arrive sometime next week.
i tried ordering in them past, was not paying attention to the part number and accidenlty order another set stock sway bars, and now i'm stuck with it
anyone looking for an extra set of stock sway bars?
where did you order your 1.4(silver) sway bars?
Last edited by racer; 02-10-2004 at 03:14 PM.
#1372
Tech Regular
rc_zombies
where did you get the hara asphalt set up from?
Could you post it?
Cheers
where did you get the hara asphalt set up from?
Could you post it?
Cheers
#1373
Tech Champion
iTrader: (9)
Originally posted by racer
i tried ordering in them past, was not paying attention to the part number and accidenlty order another set stock sway bars, and now i'm stuck with it
anyone looking for an extra set of stock sway bars?
where did you order your 1.4(silver) sway bar?
i tried ordering in them past, was not paying attention to the part number and accidenlty order another set stock sway bars, and now i'm stuck with it
anyone looking for an extra set of stock sway bars?
where did you order your 1.4(silver) sway bar?
#1374
Tech Champion
iTrader: (9)
Originally posted by Mossie
rc_zombies
where did you get the hara asphalt set up from?
Could you post it?
Cheers
rc_zombies
where did you get the hara asphalt set up from?
Could you post it?
Cheers
http://www.hpiracing.co.jp/contents/...f/ha040119.pdf
http://www.hpiracing.co.jp/contents/.../download.html
#1376
Tech Regular
My Pro4 Arrive this Moring YAY! Just a quick question to everyone out there, how long did it take you to build the car? Im so anxious to drive it!
#1377
Tech Champion
iTrader: (9)
Originally posted by Mossie
My Pro4 Arrive this Moring YAY! Just a quick question to everyone out there, how long did it take you to build the car? Im so anxious to drive it!
My Pro4 Arrive this Moring YAY! Just a quick question to everyone out there, how long did it take you to build the car? Im so anxious to drive it!
take your time building it and take note of any revisions to the manual.
#1378
Tech Regular
thats a pretty good approximation. Cheers! Did you prep the chassis or is it not necessary? This is my first carbon fibre car.
#1380
Tech Regular
cheers, will do that!