HPI R40 Nitro Car Forum
#6136
Radio box
I saw that some people are not using the radio box, why is this? To make the car lghter or balanced?
Thanks Dan
Thanks Dan
#6137
can someone with an ofna starter box post a pic of how they have it setup?..
I got the universal 1/8- 1/10 with the single motor..
thanks.
I got the universal 1/8- 1/10 with the single motor..
thanks.
#6138
I moved my receiver over to the right hand side of the car, because of the way they route the wires, makes a big mess, and it is allot easier to trouble shoot electrical problems. I've also eleminated the on - off switch, plugging my battery directly into the reciever.
Wires are much nicer, easy to route. Very much like a Mugen.
I kept my receiver cover on the left side of the car, and bolted my fuel filter to the receiver cover.
Might lose a little weight, but not enough to make a difference.
Wires are much nicer, easy to route. Very much like a Mugen.
I kept my receiver cover on the left side of the car, and bolted my fuel filter to the receiver cover.
Might lose a little weight, but not enough to make a difference.
#6140
Starter box
I have that box, and it works just great!
Dan
Dan
#6141
Tech Elite
iTrader: (17)
Yeah just called the lhs and with time constraints involved. Looks like im getting the ofna. Since its meant to be stronger.
I want the duratrax , but with shipping its 29.99. So total something over 116
While my ofna will be 74 + 24 for the extra battery. Close, but faster shipping (since its right there I just walk in and out) and lower price. 108.
Man that is so exspensive though. I wasnt expecting this in the budget and didnt allow myself enough time to grab a nice used one off ebay.
Other drawback is having to assemble the ofna.
I want the duratrax , but with shipping its 29.99. So total something over 116
While my ofna will be 74 + 24 for the extra battery. Close, but faster shipping (since its right there I just walk in and out) and lower price. 108.
Man that is so exspensive though. I wasnt expecting this in the budget and didnt allow myself enough time to grab a nice used one off ebay.
Other drawback is having to assemble the ofna.
#6142
Re: Juz Finishing fixing.
Originally posted by k_brian
Finally finish fixing up the R40.
This is some pictures of it.
Finally finish fixing up the R40.
This is some pictures of it.
What kind tires are those???
#6143
did HPI not have their own motors in mind when they designed the r40, or vice versa?
I can't adjust the low speed needle because the tank is in the way..
I can't adjust the low speed needle because the tank is in the way..
#6144
well I got around my previous problem but the motor never did run for more than 10 seconds once..
#6147
I've tried a few last season, and they do help increas traction in the short term. if your running a long main say anything more then 5 min you start to notice less and less traction.
tire sauce is better suited to electric then nitro.
tire sauce is better suited to electric then nitro.
#6148
Klan those are setting wheels not for running.
TIs is how i mount my rx
TIs is how i mount my rx
#6149
Originally posted by k_brian
Klan those are setting wheels not for running.
TIs is how i mount my rx
Klan those are setting wheels not for running.
TIs is how i mount my rx