STS .28 pull-start engine
#46
It turns out I am just an Idiot. I was used the way the .21 motor would scream at top rpm and was trying to get the same from the .28. All is fine now motor runs strong has lots of bottom end to accelerate the tall geared mammoth to 52mph in no time flat. thanks for all your tips and advice.
you need to make an 8 port .28 that will scream like the .21 dragon motor.
you need to make an 8 port .28 that will scream like the .21 dragon motor.
#47
DUAL STS28 SAVAGE
Break-in the dual STS28 SAVAGE.
http://rcbigclub.myweb.hinet.net/mov/twinpower.wmv
Wheelie when break-in...
http://myweb.hinet.net/home14/yungshen/RC1.wmv
http://rcbigclub.myweb.hinet.net/mov/twinpower.wmv
Wheelie when break-in...
http://myweb.hinet.net/home14/yungshen/RC1.wmv
#48
Originally posted by ryan6682
It turns out I am just an Idiot. I was used the way the .21 motor would scream at top rpm and was trying to get the same from the .28. All is fine now motor runs strong has lots of bottom end to accelerate the tall geared mammoth to 52mph in no time flat. thanks for all your tips and advice.
you need to make an 8 port .28 that will scream like the .21 dragon motor.
It turns out I am just an Idiot. I was used the way the .21 motor would scream at top rpm and was trying to get the same from the .28. All is fine now motor runs strong has lots of bottom end to accelerate the tall geared mammoth to 52mph in no time flat. thanks for all your tips and advice.
you need to make an 8 port .28 that will scream like the .21 dragon motor.
#50
Is this engine fit mugen MBX 5 ? I mean the engine mounting.
#51
Originally posted by jfc_tech
Dino, does the savage use the original drivetrain? what about the driveshaft, dog bone? diff set? anything change when use with this engine?
i love the video...especially when u all playing under the overhead highway
Dino, does the savage use the original drivetrain? what about the driveshaft, dog bone? diff set? anything change when use with this engine?
i love the video...especially when u all playing under the overhead highway
First you need stronger rear rims. Aluminum rims or change the hex-adapter to bigger one.
When you pulling wheelie the clutch bell is very hot. And the pinion gear is very hot,too. So it will melt away the plastics spur gear. So you need to have a fan to lower the temp of the clutch bell if you are a wheelie fanatic.
Also you need a 5th wheel fitted on the rear bumper. See the attachment. That is very important! You will damage your engine's cooling head if you don't have the 5th wheel. STS28 has too much torque. When you kick down the throttle the car just backward somersault.
Because it rains almost 2 weeks here. So we can only play R/C cars under the overhead highway. Now is rain season in Taiwan
#52
Originally posted by asw7576
Is this engine fit mugen MBX 5 ? I mean the engine mounting.
Is this engine fit mugen MBX 5 ? I mean the engine mounting.
#54
Originally posted by SpeedChair
Dino,
Did you have to modify your X1CR for the 28 motor?
Thanks.
Phong
Dino,
Did you have to modify your X1CR for the 28 motor?
Thanks.
Phong
You need the one-piece engine mount. You can get it from OFNA.
Thanks,
Dino
#55
Tech Adept
Hi Dino. I have an sts .28 on the way to me and I am looking forward to trying it out. I have a question about your savage.... What gas tank is that and where did you get it? Looking forward to running this engine
thanks
thanks
#56
Originally posted by rcosmax
Hi Dino. I have an sts .28 on the way to me and I am looking forward to trying it out. I have a question about your savage.... What gas tank is that and where did you get it? Looking forward to running this engine
thanks
Hi Dino. I have an sts .28 on the way to me and I am looking forward to trying it out. I have a question about your savage.... What gas tank is that and where did you get it? Looking forward to running this engine
thanks
Sorry that is not SAVAGE. It is RAPTOR.
Dino
#57
Tech Adept
Ahhh. I thought you had found a replacement hop up tank that solved the savage tank probs.... Anyway looking forward to running it this week.
#58
Tech Champion
iTrader: (4)
Originally posted by dino.tw
As I knew if you enjoy wheelie then you need some upgrades. Otherwise you don't need to change anything. But I knew it is hard not to pull wheelie when you have a lot power.
First you need stronger rear rims. Aluminum rims or change the hex-adapter to bigger one.
When you pulling wheelie the clutch bell is very hot. And the pinion gear is very hot,too. So it will melt away the plastics spur gear. So you need to have a fan to lower the temp of the clutch bell if you are a wheelie fanatic.
Also you need a 5th wheel fitted on the rear bumper. See the attachment. That is very important! You will damage your engine's cooling head if you don't have the 5th wheel. STS28 has too much torque. When you kick down the throttle the car just backward somersault.
Because it rains almost 2 weeks here. So we can only play R/C cars under the overhead highway. Now is rain season in Taiwan
As I knew if you enjoy wheelie then you need some upgrades. Otherwise you don't need to change anything. But I knew it is hard not to pull wheelie when you have a lot power.
First you need stronger rear rims. Aluminum rims or change the hex-adapter to bigger one.
When you pulling wheelie the clutch bell is very hot. And the pinion gear is very hot,too. So it will melt away the plastics spur gear. So you need to have a fan to lower the temp of the clutch bell if you are a wheelie fanatic.
Also you need a 5th wheel fitted on the rear bumper. See the attachment. That is very important! You will damage your engine's cooling head if you don't have the 5th wheel. STS28 has too much torque. When you kick down the throttle the car just backward somersault.
Because it rains almost 2 weeks here. So we can only play R/C cars under the overhead highway. Now is rain season in Taiwan
the 5th wheel is like the trolley wheel. OMG
Taiwan raining..we like in Savanna desert
#59
pull start cord snapped on my .28 where can I get a new one?