Putnam Propulsion
02-24-2006, 11:22 AM
#586
Arcadia: Replied to your PM...
Jimmy: Next big race in the US is the ROAR Carpet On ROad Nats, March 16-19? Making a trip across the pond?
DGullickson: Call the shop and we can get your account setup...
Thanks...
Jimmy: Next big race in the US is the ROAR Carpet On ROad Nats, March 16-19? Making a trip across the pond?
DGullickson: Call the shop and we can get your account setup...
Thanks...
02-24-2006, 01:07 PM
#587
Tech Regular
hey todd you got pm!
yea im thinking of making a trip over but my holidays at work dont start untill april!!!
when is the next race after april?
thanks jimmy
yea im thinking of making a trip over but my holidays at work dont start untill april!!!
when is the next race after april?
thanks jimmy
02-27-2006, 05:44 PM
#589
Have replied. Will need your help on my request. Tks!
03-09-2006, 01:04 AM
#592
Putnam Propulsion rules again!
Joesph Hall won the Modified class last weekend in the Australia's WA On Road Electric States Titles 2006 with his Putnam-powered motor.
Well done & congrats!
photo credit to teamadrenaline.net
Joesph Hall won the Modified class last weekend in the Australia's WA On Road Electric States Titles 2006 with his Putnam-powered motor.
Well done & congrats!
photo credit to teamadrenaline.net
Last edited by ArcadiaRC; 03-09-2006 at 01:51 AM.
03-09-2006, 06:34 AM
#593
Jason,
Excellent News!!! Thanks for the heads up and tell Joseph Thankyou for all of us...
Excellent News!!! Thanks for the heads up and tell Joseph Thankyou for all of us...
03-09-2006, 02:51 PM
#594
Hi Todd
Will Putnam be releasing a capped armature for low turn mods? i have had good performance out of your 8 turn motors (all were drill balanced) but have tried two 7 turn motors, both were epoxy balanced, and the epoxy flew off within the first 4 runs.
Im after some capped, drill balanced 7 Single arms/ motors
Will Putnam be releasing a capped armature for low turn mods? i have had good performance out of your 8 turn motors (all were drill balanced) but have tried two 7 turn motors, both were epoxy balanced, and the epoxy flew off within the first 4 runs.
Im after some capped, drill balanced 7 Single arms/ motors
03-14-2006, 04:55 AM
#595
Hi Todd
You have PM.
Thanks
Tony
You have PM.
Thanks
Tony
03-14-2006, 05:55 PM
#596
We will be out of the shop from 3/15-3/20 while attending the ROAR On-Road Nats...
Shop reopens Tuesday, 3/21.
Shop reopens Tuesday, 3/21.
03-14-2006, 05:58 PM
#597
Besercoe: Yes, I haven't epoxy balanced since the 3800's were released. We have run many arms that have had no arm caps whatsoever with no failures. You shouldn't have a failure if the proper solder, resin, heat, etc; are used.
03-14-2006, 06:31 PM
#598
Ok, i must have some seriously old stock then.
I will have Arcadia send back the 7 Single that both lost its epoxy, and threw a wind on its 3rd run at the TITC.
Also maybe you should contact Oscar and let him know what the correct combination of solder, resin and heat is, as he was having the same problem at the TITC. His team went through so many motors that Oscar had to requisition some motors from the track shop to get them through the event.
I will have Arcadia send back the 7 Single that both lost its epoxy, and threw a wind on its 3rd run at the TITC.
Also maybe you should contact Oscar and let him know what the correct combination of solder, resin and heat is, as he was having the same problem at the TITC. His team went through so many motors that Oscar had to requisition some motors from the track shop to get them through the event.
03-14-2006, 07:20 PM
#599
Originally Posted by Besercoe
Ok, i must have some seriously old stock then.
I will have Arcadia send back the 7 Single that both lost its epoxy, and threw a wind on its 3rd run at the TITC.
Also maybe you should contact Oscar and let him know what the correct combination of solder, resin and heat is, as he was having the same problem at the TITC. His team went through so many motors that Oscar had to requisition some motors from the track shop to get them through the event.
I will have Arcadia send back the 7 Single that both lost its epoxy, and threw a wind on its 3rd run at the TITC.
Also maybe you should contact Oscar and let him know what the correct combination of solder, resin and heat is, as he was having the same problem at the TITC. His team went through so many motors that Oscar had to requisition some motors from the track shop to get them through the event.
In all fairness, we haven't had to run them in extreme heat yet with 1.21 voltage 3800's at 35... With the added heat, I could see more failures. Trust me, if Oscar is blowing up stuff, none of us are immune to it...