Mugen MTX-3
Tech Champion
iTrader: (4)
YES!!!!!!!!!!!
Originally posted by Aaron_ETF
Robbie,
I am new, just a quick question, I am wondering if you guys (Pro Driver) using brake? Coz I heard just some they don't use brake, what is the truth?
Robbie,
I am new, just a quick question, I am wondering if you guys (Pro Driver) using brake? Coz I heard just some they don't use brake, what is the truth?
I was driving next to Hara at the Nats last year. we were the same speed down the straight, when we got to turn 1, I coasted in and he used the brakes hard! He pulled 10 cars thru the corner because of that. I discovered if you run on a track with lots of grip (traction rolling grip) you can use a lot of brakes.
Re: YES!!!!!!!!!!!
But isn't make the car spin if we use lot of brake?
Sincerely,
Sincerely,
Originally posted by Slotmachine
I was driving next to Hara at the Nats last year. we were the same speed down the straight, when we got to turn 1, I coasted in and he used the brakes hard! He pulled 10 cars thru the corner because of that. I discovered if you run on a track with lots of grip (traction rolling grip) you can use a lot of brakes.
I was driving next to Hara at the Nats last year. we were the same speed down the straight, when we got to turn 1, I coasted in and he used the brakes hard! He pulled 10 cars thru the corner because of that. I discovered if you run on a track with lots of grip (traction rolling grip) you can use a lot of brakes.
Yeah..... heavy braking could spin out the car, so you have to test it before racing / playing.
Front one way setup: You can adjust Brake EPA ( end point adjustment ) to limit the brake travel from transmitter. The braking power will be softer but you won't spin.
Front ball diff : You can use harder braking power and the car remain stable. The car could spin out if four tires are lock up completely.
Front one way setup: You can adjust Brake EPA ( end point adjustment ) to limit the brake travel from transmitter. The braking power will be softer but you won't spin.
Front ball diff : You can use harder braking power and the car remain stable. The car could spin out if four tires are lock up completely.
Tech Regular
iTrader: (1)
Thanks robbie for the info.
Tech Adept
brakes
I try to cut 2 degrees into the rear tyers when I true them, You know that dixie cup effect, It helps you stay stable on breaking HAYWYRE
Tech Addict
iTrader: (9)
MTX 4
hi guys
i was not here for a while so please excuse me if i am being repetative or if this question was answered previously. I would like to know if anyone (prehaps Robbie C. ) know when MTX-4 comes out. anyone got any pre release pics??
thanks
i was not here for a while so please excuse me if i am being repetative or if this question was answered previously. I would like to know if anyone (prehaps Robbie C. ) know when MTX-4 comes out. anyone got any pre release pics??
thanks
Re: Re: spool
Who sells this?
-Rich
-Rich
Originally posted by ROBBIE C
Kawahara (K781) works great on tight parking lot tracks.
Kawahara (K781) works great on tight parking lot tracks.
Tech Master
iTrader: (17)
RobbieC,
Who is the distributor for Kawahara parts? Thanks.
Who is the distributor for Kawahara parts? Thanks.
Tech Elite
iTrader: (28)
Mugen is the US distributor for Kawahara
Re: MTX 4
Originally posted by brooklynrc
hi guys
i was not here for a while so please excuse me if i am being repetative or if this question was answered previously. I would like to know if anyone (prehaps Robbie C. ) know when MTX-4 comes out. anyone got any pre release pics??
thanks
hi guys
i was not here for a while so please excuse me if i am being repetative or if this question was answered previously. I would like to know if anyone (prehaps Robbie C. ) know when MTX-4 comes out. anyone got any pre release pics??
thanks
I understand it is a new car and not a MTX3.5. I can't wait.
MUGEN ROCKS!!!!!!!
I cannot seem to find the Kawahara front spool available off of the Mugenracing.com store?
-Rich
-Rich
Check e-bay. I used a 3-racing one for ever. No problem yet. Cheap too.
I just searched ebay and also did some google searches. I cannot find the Kawahara nor the 3-racing one. I found plenty of spools for other cars, tho (such as the HPI).
Tech Regular
iTrader: (1)
here are the links
http://www.3racing.com.hk/
l dont know about KAWAHARA there link dont work any more
Thanks
Dot Com
http://www.3racing.com.hk/
l dont know about KAWAHARA there link dont work any more
Thanks
Dot Com
Hello
Hello,
I just want to say hi to all of you guys. I just purchased a MTX-3 prospec kit and have finished builting it. Please see below for some pictures. [IMG][/IMG] [IMG][/IMG] [IMG][/IMG]
For the engine & pipe, I am using RB V15 Rody modified & RB inline tuned pipe.
Right now I am having a little problem with this car... I already made quite a few runs and I am still having a little drag from the belts. I tried soaking them with WD40 but that didn't work so I don't know what to do next... All my other cars will loosen up after few runs... Does this car suppose to have some drag from the belts? Thank you.
I just want to say hi to all of you guys. I just purchased a MTX-3 prospec kit and have finished builting it. Please see below for some pictures. [IMG][/IMG] [IMG][/IMG] [IMG][/IMG]
For the engine & pipe, I am using RB V15 Rody modified & RB inline tuned pipe.
Right now I am having a little problem with this car... I already made quite a few runs and I am still having a little drag from the belts. I tried soaking them with WD40 but that didn't work so I don't know what to do next... All my other cars will loosen up after few runs... Does this car suppose to have some drag from the belts? Thank you.