DF-03RA WRC wip
05-17-2009, 10:55 PM
#31
If you intend to jump with that car I think it would be a good idea to bump the body up higher a bit otherwise I don't see the front spoiler lasting too long.
05-18-2009, 05:40 PM
#32
DONE 8)
all wired-up, 3 packs later clean again
06-01-2009, 03:58 PM
#34
are you guys using the kit supplied 90wt oil? I put 45 in all 4.
how does it feel with the 90? I know tamiya Always does their homework on set-up. I did not notice the weight until I looked at the bottle and then checked the manual.
all 4 were already built . Thanks, fat
how does it feel with the 90? I know tamiya Always does their homework on set-up. I did not notice the weight until I looked at the bottle and then checked the manual.
all 4 were already built . Thanks, fat
06-04-2009, 02:52 PM
#35
here it is
The 45 did not work well so i put 80wt and much better now.
The brushless set up below will not fit in the car with out modding the chassis
or sticking the speedo wayy up high. I am using a dark impact body as a inner body so i have to keep the electronics low in the chassis.
enjoy I will update on the driving/jumping when the rain lets up at my local track
The 45 did not work well so i put 80wt and much better now.The brushless set up below will not fit in the car with out modding the chassis
or sticking the speedo wayy up high. I am using a dark impact body as a inner body so i have to keep the electronics low in the chassis.enjoy
I will update on the driving/jumping when the rain lets up at my local track
Last edited by fat500; 07-22-2010 at 03:09 PM.
Currently Active Users Viewing This Thread: 1 (0 members and 1 guests)
