Losi 8ight nitro sell out vspec os pipes clutchs parts starter box fuelgun khz
12-05-2008, 05:29 AM
#1
Losi 8ight nitro sell out vspec os pipes clutchs parts starter box fuelgun khz
FOR SALE Nitro sell out. OBO!
PRICES LOWERED
Everything that I have bought in the last 2 years running a losi 8ight buggy
-----$45.00 OS-2060 tuned pipe
-----$130.00 OS EB Mods Vspec VZ-B with 21C carb (idle screw sticks out) This motor is also a rebuild after about 7 gallons.
The piston and sleeve are not new. They are OS Rocket Pinched. This was the first time I have ever pinched a motor.
It worked better than I thought it would. Once the pistion and sleeve came back I reassembled the motor with
new wrist pin, c-clips, OS Speed Connecting Rod, new 08 VZ-B crankcase, and TKO ceramic bearings front and rear.
I broke it in using the heat cycle method like I do with all my motors.
I’m impressed this motor runs like it was brand new. I have about 1-1.5 gallons on this motor.
Comes with the original carb inserts and original packaging.
These are race motors and I use them so. But I also take very good care of everything.
Always use after run oil. I change air filters all the time.
-----$40.00 Proline Straight Shooter Fuel Gun, 2 glow igniters 1 charger and a fuel bottle.
-----$30.00 Losi parts. Items at the top are new out of the kit that I never put together.
(I bought 2 8ights I for racing one for parts) items at the bottom are used.
New and used set of brake pads, disks, and pins, new and used set of throttle linkage. New set of motor mounts.
New and used fuel tank. And 2 used air filters
-----SOLD----- Tekin R1 ESC
All prices are shipped to the USA lower 48 I do accept PayPal and ship once the paypal transaction is complete.
Check my feedback I don’t sell junk and will not sell my stuff for the price of junk
My ebay name is f-bodyv8 if you want to check that feedback also.
Thanks For looking
Only Trades considered are items for taking my 8ight buggy brushless
RCPD RC product designs conversion, Neu 1512 motor
2.5D 2050 kv
1.5Y 1850 kv
3D 1700 kv
3.5D 1500kv
2Y 1350 kv
with finned can., Mamba Monster V3, Losi 1/8 exceleron ESC
mod 1 pinions plastic spur. you know the stuff i need..... Maybe good condition lipos
OS-2060
OS VSPEC'S
FUEL GUN
8IGHT PARTS
TEKIN R1 AND 537
PRICES LOWERED
Everything that I have bought in the last 2 years running a losi 8ight buggy
-----$45.00 OS-2060 tuned pipe
-----$130.00 OS EB Mods Vspec VZ-B with 21C carb (idle screw sticks out) This motor is also a rebuild after about 7 gallons.
The piston and sleeve are not new. They are OS Rocket Pinched. This was the first time I have ever pinched a motor.
It worked better than I thought it would. Once the pistion and sleeve came back I reassembled the motor with
new wrist pin, c-clips, OS Speed Connecting Rod, new 08 VZ-B crankcase, and TKO ceramic bearings front and rear.
I broke it in using the heat cycle method like I do with all my motors.
I’m impressed this motor runs like it was brand new. I have about 1-1.5 gallons on this motor.
Comes with the original carb inserts and original packaging.
These are race motors and I use them so. But I also take very good care of everything.
Always use after run oil. I change air filters all the time.
-----$40.00 Proline Straight Shooter Fuel Gun, 2 glow igniters 1 charger and a fuel bottle.
-----$30.00 Losi parts. Items at the top are new out of the kit that I never put together.
(I bought 2 8ights I for racing one for parts) items at the bottom are used.
New and used set of brake pads, disks, and pins, new and used set of throttle linkage. New set of motor mounts.
New and used fuel tank. And 2 used air filters
-----SOLD----- Tekin R1 ESC
All prices are shipped to the USA lower 48 I do accept PayPal and ship once the paypal transaction is complete.
Check my feedback I don’t sell junk and will not sell my stuff for the price of junk
My ebay name is f-bodyv8 if you want to check that feedback also.
Thanks For looking
Only Trades considered are items for taking my 8ight buggy brushless
RCPD RC product designs conversion, Neu 1512 motor
2.5D 2050 kv
1.5Y 1850 kv
3D 1700 kv
3.5D 1500kv
2Y 1350 kv
with finned can., Mamba Monster V3, Losi 1/8 exceleron ESC
mod 1 pinions plastic spur. you know the stuff i need..... Maybe good condition lipos
OS-2060
OS VSPEC'S
FUEL GUN
8IGHT PARTS
TEKIN R1 AND 537
Last edited by tdeal823; 12-16-2008 at 06:05 AM. Reason: sold stuff
12-05-2008, 06:34 AM
#6
Only Trades considered are items for taking my 8ight buggy brushless
RCPD RC product designs conversion, Neu 1512 2D or 2.5D with fan., Mamba Monster V3, Losi 1/8 exceleron ESC
mod 1 pinions plastic spur. you know the stuff i need..... Maybe good condition lipos
RCPD RC product designs conversion, Neu 1512 2D or 2.5D with fan., Mamba Monster V3, Losi 1/8 exceleron ESC
mod 1 pinions plastic spur. you know the stuff i need..... Maybe good condition lipos
12-05-2008, 08:37 AM
#7
looking for a front gear box set (tabs broke off on mine) and front shock tower
also jammin crt x1 front left lower a-arm and cvd
need asap please email [email protected]
also jammin crt x1 front left lower a-arm and cvd
need asap please email [email protected]
Last edited by bustitup; 12-05-2008 at 09:28 AM.
12-05-2008, 04:21 PM
#12
ygpm
engine gaskets,springs?