Barracuda from Alex racing
#4411
Regional Moderator
Originally posted by Herminator
looking good more orange on the way I take it
looking good more orange on the way I take it
#4412
Originally posted by JDM_DOHC_SiR
Sure did ...its called a flat tip soldering Iron and a little time and remove the 1.2mm that you need to..
but ALEX is working on making a thicker one...from what I have been told
-Dave
Sure did ...its called a flat tip soldering Iron and a little time and remove the 1.2mm that you need to..
but ALEX is working on making a thicker one...from what I have been told
-Dave
wouldn't like to be around when those fumes are given off
#4413
Regional Moderator
Originally posted by Herminator
1.2mm since when was the new chassis that much thicker?
wouldn't like to be around when those fumes are given off
1.2mm since when was the new chassis that much thicker?
wouldn't like to be around when those fumes are given off
#4414
Originally posted by Ko Racer
aahhh its nothing a few cold ones wont take care of
aahhh its nothing a few cold ones wont take care of
Of course I wouldn't be able to do that if I was in your strange country although by the time I get my Xenon conversion I will be legal there
#4415
Regional Moderator
Originally posted by Herminator
I hope you're not suggesting this to any of the younger guys around here, if there are any
Of course I wouldn't be able to do that if I was in your strange country although by the time I get my Xenon conversion I will be legal there
I hope you're not suggesting this to any of the younger guys around here, if there are any
Of course I wouldn't be able to do that if I was in your strange country although by the time I get my Xenon conversion I will be legal there
oh no im talking dew baby
#4418
Regional Moderator
Originally posted by JDM_DOHC_SiR
3.1mm is what it came out to om my calipers .... rather thick..
-Dave
3.1mm is what it came out to om my calipers .... rather thick..
-Dave
#4419
Regional Moderator
Originally posted by JDM_DOHC_SiR
Man KO that stuff is Crack!!! way to sweet
-Dave
Man KO that stuff is Crack!!! way to sweet
-Dave
its does good for keeping you going bro but yes its sweet
what you guys have there to sip on?
#4420
Tech Champion
iTrader: (31)
Originally posted by Ko Racer
yeah i just got done melting that bumper bracket away and its fitting sweet now
yeah i just got done melting that bumper bracket away and its fitting sweet now
-Dave
#4421
Tech Champion
iTrader: (31)
Originally posted by Ko Racer
its does good for keeping you going bro but yes its sweet
what you guys have there to sip on?
its does good for keeping you going bro but yes its sweet
what you guys have there to sip on?
But I drink ... Water ..mostly ..but there is some quite good soft drinks over here that are a blast to drink.
-Dave
#4422
Regional Moderator
Originally posted by JDM_DOHC_SiR
A good tip.. is to get the bumper support nice and hot and then push it on to the new chassis or a older one ..did the job for me and no extra triming to do...
-Dave
A good tip.. is to get the bumper support nice and hot and then push it on to the new chassis or a older one ..did the job for me and no extra triming to do...
-Dave
#4423
Regional Moderator
Originally posted by JDM_DOHC_SiR
Tea.... Tea and more Tea...
But I drink ... Water ..mostly ..but there is some quite good soft drinks over here that are a blast to drink.
-Dave
Tea.... Tea and more Tea...
But I drink ... Water ..mostly ..but there is some quite good soft drinks over here that are a blast to drink.
-Dave
oh yeah good ole tea that is a morning thing here hot green tea