BANZAI Motors
#1367
Tech Elite
Judy,
Was great catching up with you!! Its been forever..... and how have things changed, huh? I'm looking forward to your email and I can't wait to see you in March!
Was great catching up with you!! Its been forever..... and how have things changed, huh? I'm looking forward to your email and I can't wait to see you in March!
#1368
No mom, not going to make it this year. going next year, with the kids being older and all.. Have a good time, and good luck
#1369
http://img172.imageshack.us/img172/8...2506071jb1.jpg
A sneek peek...
I'm not sure what time we will be down there tomorrow. By the time we get ready and whatnot, it will be close or past closing time, but if we get a nice look at the track that might work out well enough. We will be bringing enough tablespace for the 4 of us, and enough chairs for us, if we need them. I'm not sure what I'll be running, but my dad wants to buy me a 6.5 novak, so I may run sportsman mod. I'm not too thrilled about the handouts, so I may end up running 19t and mod, though I have not made up my mind .
A sneek peek...
I'm not sure what time we will be down there tomorrow. By the time we get ready and whatnot, it will be close or past closing time, but if we get a nice look at the track that might work out well enough. We will be bringing enough tablespace for the 4 of us, and enough chairs for us, if we need them. I'm not sure what I'll be running, but my dad wants to buy me a 6.5 novak, so I may run sportsman mod. I'm not too thrilled about the handouts, so I may end up running 19t and mod, though I have not made up my mind .
#1370
Tech Master
Johnny it looks pretty good. If I were you I'd cut the FET servo wire, the thin blue one. My friend didnt cut it and the end touched the graphite chassis and POOF!
#1371
Johnny..you want to put gold springs up front in the T4. Better yet...here's the Cavalieri set-up for HRH that I use everywhere....
http://www.rc10.com/racerhub/setup/r...bbies_2005.pdf
Also..buy some 30 degree hub carriers...will be much better for HRH...I'd also consider switching to a plastic chassis....
I agree you should cut the blue wire...youll never use it with the servos you use.
http://www.rc10.com/racerhub/setup/r...bbies_2005.pdf
Also..buy some 30 degree hub carriers...will be much better for HRH...I'd also consider switching to a plastic chassis....
I agree you should cut the blue wire...youll never use it with the servos you use.
#1372
Dawn, great talking to you too! We are all so busy that
we forget to keep in touch with people, but it's like old times
once we get on the phone!!!! See you at the Cactus!!
Thanks Halve, we will miss you!
Johnny S. we don't sell brushless, service them, and they don't
pay the bills here! Just the word is enough to send me into a
real rant, not to mention Scott and Jason!! So to all please, if you
want to talk bl, please go to a thread they pay for. Thanks!
Judi
we forget to keep in touch with people, but it's like old times
once we get on the phone!!!! See you at the Cactus!!
Thanks Halve, we will miss you!
Johnny S. we don't sell brushless, service them, and they don't
pay the bills here! Just the word is enough to send me into a
real rant, not to mention Scott and Jason!! So to all please, if you
want to talk bl, please go to a thread they pay for. Thanks!
Judi
#1373
Tech Master
dialed
is scott dialed to tQ the old dudes class
#1374
Hey Bob!! Looks like you and I have been left "home alone"!
I just talked to Scott, all the Old Dudes think they Tq'd practice!
Guess that's a good sign. The factory guys are all there. Drake,
Cavalieri, Travis, Saxton, Mayfield, there's more, all I can remember
now. Team Banzai is well represented and they were all there for
practice today. Track seems to be holding up so far.
Garrick Turner stopped by to say hello. He may race tomorrow!
That's all I know for now!!
Judi
I just talked to Scott, all the Old Dudes think they Tq'd practice!
Guess that's a good sign. The factory guys are all there. Drake,
Cavalieri, Travis, Saxton, Mayfield, there's more, all I can remember
now. Team Banzai is well represented and they were all there for
practice today. Track seems to be holding up so far.
Garrick Turner stopped by to say hello. He may race tomorrow!
That's all I know for now!!
Judi
#1375
the updates are appreciated Mom!
#1376
I'll do the best I can, Ryan! It's hard not being up there with
my boys, hope to get there tomorrow!
Just got off the phone with Scott, the first heat just ran!
The 2006 Reedy Race is underway!
Scott said Casper looked good in practice. Casper emailed
me and said they were having fun! That's the most important
thing! Jeremy Felles is there, going to run Factory Mod! Vanair
made it, he's exhausted, but there. He worked a bunch of hours, and
worked so hard on the track! Thanks Vanair!
Nick Lasley is there, always good competition. For those of you
who don't know, Nick is a Ranch Pit Shop alumni! Gil Losi Jr. is there too.
All I can think of right now. Will post as Scott calls in.
Judi
my boys, hope to get there tomorrow!
Just got off the phone with Scott, the first heat just ran!
The 2006 Reedy Race is underway!
Scott said Casper looked good in practice. Casper emailed
me and said they were having fun! That's the most important
thing! Jeremy Felles is there, going to run Factory Mod! Vanair
made it, he's exhausted, but there. He worked a bunch of hours, and
worked so hard on the track! Thanks Vanair!
Nick Lasley is there, always good competition. For those of you
who don't know, Nick is a Ranch Pit Shop alumni! Gil Losi Jr. is there too.
All I can think of right now. Will post as Scott calls in.
Judi
#1377
1st round of Factory Mod is over. 30 Factory drivers. 3 heats.
Jeremy Felles is 6th!!!!!!!
Tebo and Hartson are also there. Just thought of that.
It's hard for Scott to
do motors and race and keep me updated. Doing the best he can,
should have more shortly!
Judi
Jeremy Felles is 6th!!!!!!!
Tebo and Hartson are also there. Just thought of that.
It's hard for Scott to
do motors and race and keep me updated. Doing the best he can,
should have more shortly!
Judi
#1378
Good luck to all the guys Im sure they will do good.
Mom I was told to tell you by one of my old racing buddies Mike Gustafson to tell you Hello.
Thanks for the updates.
Mom I was told to tell you by one of my old racing buddies Mike Gustafson to tell you Hello.
Thanks for the updates.
#1379
Kevin, Mike is one of " my boys" !! Tell him to stop in here
and see me once in awhile!!
1st round is over.
Factory Mod: Felles 6th
Open Mod: 5th Casper
12th Puller
Vanair broke
St Truck
5th Casper
9th Keith Whisler
11th Gerd
19t
6th Casper
12 Gerd
13 Ebi
18 Scott
19 Puller
Old Dudes
2nd Ebi
5th Chris, ( Jimmy's friend, I don't know his last name?!)
6th Scott
9th Fritz
Ebi had the TQ until Fernandez took it.
Scott says they had some "ooopppes!" and they'll all do better
next round. Looks like they're in the hunt!! Real hard time hearing
on the cell phone. Some spots up there are "dead zones" !!
Judi
and see me once in awhile!!
1st round is over.
Factory Mod: Felles 6th
Open Mod: 5th Casper
12th Puller
Vanair broke
St Truck
5th Casper
9th Keith Whisler
11th Gerd
19t
6th Casper
12 Gerd
13 Ebi
18 Scott
19 Puller
Old Dudes
2nd Ebi
5th Chris, ( Jimmy's friend, I don't know his last name?!)
6th Scott
9th Fritz
Ebi had the TQ until Fernandez took it.
Scott says they had some "ooopppes!" and they'll all do better
next round. Looks like they're in the hunt!! Real hard time hearing
on the cell phone. Some spots up there are "dead zones" !!
Judi
#1380
2nd round started.
Factory Mod, Felles was 1 second behind Cavalieri, running 2nd, flying ,
on the LAST LAP and then,
something broke and flew off the truck!!!!!
I guess Factory Mod is running first, so I'll update as it comes in.
Judi
Factory Mod, Felles was 1 second behind Cavalieri, running 2nd, flying ,
on the LAST LAP and then,
something broke and flew off the truck!!!!!
I guess Factory Mod is running first, so I'll update as it comes in.
Judi
Last edited by BanzaiMom; 10-27-2006 at 02:45 PM.