debonding tires
#1
debonding tires
is there any good way to unglue tires, if so how?
#2
Tech Master
Put the in the oven at 350* for 5 to 10 minuets and they fall off the rim.
#3
Tech Master
iTrader: (4)
get a empty coffee can with a lid on it. put some 1" wood block in a + on the bottom. fill it up with acetone under the wood. fits 2 buggy wheels, or one truggy wheel.
wait a few days, and presto! the glue melts and everything comes out ok. wheel, tire, foams. all still good if you need to reuse any of them.
the fumes do the work, not the liquid
wait a few days, and presto! the glue melts and everything comes out ok. wheel, tire, foams. all still good if you need to reuse any of them.
the fumes do the work, not the liquid
#4
Tech Master
iTrader: (10)
Its the fumes that work..Huh? I`m going to have top try it that way
I use a 5 gallon bucket fill with 2 gallons of acetone.Submerge the tires in the fluid and place the lid on the bucket ..Wait 24 hrs and remove the wheels
I have a friend that has been reusing the same fluid for the last few months..Make sure you keep the lid on it so the stuff don`t evaporate
Foams wiull be garbage but the tire and rim will still be good...I use this method to reuse the rims or to remove good tires from craked or broken rims
I use a 5 gallon bucket fill with 2 gallons of acetone.Submerge the tires in the fluid and place the lid on the bucket ..Wait 24 hrs and remove the wheels
I have a friend that has been reusing the same fluid for the last few months..Make sure you keep the lid on it so the stuff don`t evaporate
Foams wiull be garbage but the tire and rim will still be good...I use this method to reuse the rims or to remove good tires from craked or broken rims
#5
#6
Tech Master
iTrader: (4)
Its the fumes that work..Huh? I`m going to have top try it that way
I use a 5 gallon bucket fill with 2 gallons of acetone.Submerge the tires in the fluid and place the lid on the bucket ..Wait 24 hrs and remove the wheels
I have a friend that has been reusing the same fluid for the last few months..Make sure you keep the lid on it so the stuff don`t evaporate
Foams wiull be garbage but the tire and rim will still be good...I use this method to reuse the rims or to remove good tires from craked or broken rims
I use a 5 gallon bucket fill with 2 gallons of acetone.Submerge the tires in the fluid and place the lid on the bucket ..Wait 24 hrs and remove the wheels
I have a friend that has been reusing the same fluid for the last few months..Make sure you keep the lid on it so the stuff don`t evaporate
Foams wiull be garbage but the tire and rim will still be good...I use this method to reuse the rims or to remove good tires from craked or broken rims
#7
Acetone works great but beware of Losi Pink, Proline R3 and Panter Clay (likely J-Concepts Gold too), if you do the acetone trick on these rubber compounds the tires will shrink and harden like voodoo skulls. Have to employ the bake trick on these.
#8
Its the fumes that work..Huh? I`m going to have top try it that way
I use a 5 gallon bucket fill with 2 gallons of acetone.Submerge the tires in the fluid and place the lid on the bucket ..Wait 24 hrs and remove the wheels
I have a friend that has been reusing the same fluid for the last few months..Make sure you keep the lid on it so the stuff don`t evaporate
Foams wiull be garbage but the tire and rim will still be good...I use this method to reuse the rims or to remove good tires from craked or broken rims
I use a 5 gallon bucket fill with 2 gallons of acetone.Submerge the tires in the fluid and place the lid on the bucket ..Wait 24 hrs and remove the wheels
I have a friend that has been reusing the same fluid for the last few months..Make sure you keep the lid on it so the stuff don`t evaporate
Foams wiull be garbage but the tire and rim will still be good...I use this method to reuse the rims or to remove good tires from craked or broken rims
up top he said it wouldn't
you said it would
#10
thanks, i might try baking then
does it make the house stink though?
thanks for all the replys
does it make the house stink though?
thanks for all the replys
#11
If you're using acetone, bet on the foams being destroyed. Sounds like if only the fumes come in contact with the outside of the tire then the foams can survive but usually acetone will eat foams.
#14
dont submerge in acetone, its the fumes that do the work. so sit them up off a pool of acetone and cover. go drink some brews, go to bed, wake up, check them, go to work, come home, more brews, run a tank or batt, then b4 bed, check em and more than likely done. ready for refoam, tire change, or removal of a cracked rim
R
R