Team Durango DETC410
#646
I posted the fix for this several pages back. The stock screw only goes into the hub 2 threads at most, put in either a 8mm? or 10mm? (can't remember but I used one long enough that it just passes all the way through), haven't had a issue since. If you check you can probably re-use the steering hubs you thought where bad by going to the longer screw.
#647
Tech Rookie
But I´ll have to admit that I had to wide the springs a Little bit to have it fit.
I do not run a saver at all I just run an aluminium horn. No issues as of yet from the current Sanwa servo or the Past Savox 1251.
Other then that, im pretty satisfied with the build. Havent tried it yet on a course..Oh! One of the piston rods came with hardly no threads. But they send me a pair of new ones from hobbico right away!
#648
Tech Addict
iTrader: (1)
I had my first outing with this car last night, after 2 packs, i ran out of time, and was really pleased! It's box stock except i have the Aluminum Servo mounts, Xray Hard front bumper and Yokomo Pink/Blue springs, and it was really composed! I was able to concentrate on driving instead of fighting with the car! I used to have a BD7 2014, i know how much work that car was, lets see if the Durango is the same.
First race is Sunday, lets see how it goes!
First race is Sunday, lets see how it goes!
#649
Not sure if anyone has mentioned this, but it appears that Durango is coming out with 86t and 100t 64p spur gears for the detc410 sometime in June.
Has anyone seen any aftermarket parts for this yet (exotek, RSD, smokem, etc)? I wonder if one of these companies will make a shorty shock conversion.
Has anyone seen any aftermarket parts for this yet (exotek, RSD, smokem, etc)? I wonder if one of these companies will make a shorty shock conversion.
#650
Tech Fanatic
iTrader: (40)
C&M Motorsports is working on a replacement carbon fiber chassis that is 2.5mm instead of the 2.25mm as well as a stronger 2.5mm top deck.
He's also making a carbon bumper brace to replace the plastic kit piece and if there's enough demand he's making production 2.25mm 7075T6 aluminum chassis. The first prototypes will be ready this week with production chassis the soon after.
You can email here: [email protected]
Facebook page is here: https://www.facebook.com/pages/CM-Mo...53713248085996
#651
C&M Motorsports is working on a replacement carbon fiber chassis that is 2.5mm instead of the 2.25mm as well as a stronger 2.5mm top deck.
He's also making a carbon bumper brace to replace the plastic kit piece and if there's enough demand he's making production 2.25mm 7075T6 aluminum chassis. The first prototypes will be ready this week with production chassis the soon after.
You can email here: [email protected]
Facebook page is here: https://www.facebook.com/pages/CM-Mo...53713248085996
He's also making a carbon bumper brace to replace the plastic kit piece and if there's enough demand he's making production 2.25mm 7075T6 aluminum chassis. The first prototypes will be ready this week with production chassis the soon after.
You can email here: [email protected]
Facebook page is here: https://www.facebook.com/pages/CM-Mo...53713248085996
#652
Tech Fanatic
iTrader: (29)
C&M Motorsports is working on a replacement carbon fiber chassis that is 2.5mm instead of the 2.25mm as well as a stronger 2.5mm top deck.
He's also making a carbon bumper brace to replace the plastic kit piece and if there's enough demand he's making production 2.25mm 7075T6 aluminum chassis. The first prototypes will be ready this week with production chassis the soon after.
You can email here: [email protected]
Facebook page is here: https://www.facebook.com/pages/CM-Mo...53713248085996
He's also making a carbon bumper brace to replace the plastic kit piece and if there's enough demand he's making production 2.25mm 7075T6 aluminum chassis. The first prototypes will be ready this week with production chassis the soon after.
You can email here: [email protected]
Facebook page is here: https://www.facebook.com/pages/CM-Mo...53713248085996
How much for the bumper brace? I'd prob be interested.
#653
Tech Fanatic
iTrader: (40)
It's probably best to shoot an email to [email protected] for pricing info.
Facebook will have the new products & pricing any day I'm sure.
#654
Tech Addict
iTrader: (1)
First race weekend with the car, all i can say is flawless. The car was great, pushed a little, changed the front springs, and i finished 2nd in the A-main! Awesome car!
Can anyone tell me the size of the Durango's pivot balls? I want to replace the ball cups, after 1 weekend of racing, the original ones have developed a lot of slop.
Can anyone tell me the size of the Durango's pivot balls? I want to replace the ball cups, after 1 weekend of racing, the original ones have developed a lot of slop.
Last edited by Cadman1981; 05-28-2014 at 08:30 AM.
#655
Tech Elite
iTrader: (51)
Join Date: Feb 2002
Location: Comin at ya from a distant galaxy
Posts: 2,930
Trader Rating: 51 (100%+)
I have a Durango for Sale if any ones interested pm me.
#656
Same here, one slightly used on carpet car with a few spares. PM me if interested.
#658
I received this car under a certain situation that helped another racer out. I was curious about the car and the geometry of the car.
Taking nothing away from this car, it is flat out the best out of the box car I have ever driven. The few times I have run it the car has worked exceptionally, and surprisingly well. It responds to changes positively and is very easy to work on.
If I wasn't under another tent this would be the car I would run, hands down.
Taking nothing away from this car, it is flat out the best out of the box car I have ever driven. The few times I have run it the car has worked exceptionally, and surprisingly well. It responds to changes positively and is very easy to work on.
If I wasn't under another tent this would be the car I would run, hands down.
#659
Hey guys. The Durango has been a great car. Time to sell and make room for a new stallion in the stable. tons of spares. see my post on the for sale forum
Nick K
Nick K
#660
Tech Rookie
Hi guys,
last weekend was my first outing with the DETC410.
I´m very happy with the Car. It´s very stable and I could concentrate on my drivingstyle.
You can read the report on the News Site of the Team durange Homepage.
thx
Michael
last weekend was my first outing with the DETC410.
I´m very happy with the Car. It´s very stable and I could concentrate on my drivingstyle.
You can read the report on the News Site of the Team durange Homepage.
thx
Michael