Airtronics M11X
#1681
Tech Regular
Shrinkwrap - great idea! I was trying to get fuel tubing on it but was worried about breaking the trigger. Will give it a go.
#1682
Tech Master
iTrader: (16)
Does that mean you could throw the new one at someone and it'll hit them harder?
If it were me looking for a radio, I know I would definitely stick with the M11x as there doesn't seem to be anything of note that's worth waiting for on the M12 - I could care less about telemetry and I'm not that big a fan of the 'streamlined' design. It looks way too much like an MT-4 to me. Plus they screwed up the naming big time. If there were any logic involved, it would be called an M14 coz there was never any M9 or M10, so why increment by 1 now? Makes no sense to me. And how long would you wait? Does anyone even know when the M12 is actually going to be released?
Just my 0.02c.
If it were me looking for a radio, I know I would definitely stick with the M11x as there doesn't seem to be anything of note that's worth waiting for on the M12 - I could care less about telemetry and I'm not that big a fan of the 'streamlined' design. It looks way too much like an MT-4 to me. Plus they screwed up the naming big time. If there were any logic involved, it would be called an M14 coz there was never any M9 or M10, so why increment by 1 now? Makes no sense to me. And how long would you wait? Does anyone even know when the M12 is actually going to be released?
Just my 0.02c.
Last edited by aaron125; 06-06-2012 at 06:24 AM. Reason: release date?
#1684
Tech Master
iTrader: (1)
Yea, (IMO) that M12 is really really ugly... I'm just now getting back into R/C after a 6 year plus break, and I saw the pictures of that M12 a couple weeks ago while I was doing research on the available high-end radios , and what was coming out in the near future..... Myself, being really used to the M8 platform in years past, and hearing that that ugly M12 was on the horizon...I went right down and purchased the M11X ... reguardless of its possible new features, (which most can hardly be detected by a human being already lol) I think Sanwa is making a BIG mistake with that design.... Many racers like what their used to with a radios basic design... Just my 2 cents
#1689
Tech Elite
iTrader: (7)
There was no advertising in my thread. I asked a single simple question and you guys are targeting me and every post we make. I haven't made any posts with links to my store since I was warned but you guys still harass me. As far as lack of professionalism, I have seen dozens if not more ppl making posts and recommending products with links to stores they are tied to.
Anyone got a brush?
#1691
Hi,
I posted same question on Tekin RS thread but no luck so could anyone share some info.
I have M11x + Tekin RS for my 17.5 stock onroard.
how do you guys adjust throttle curve and related setting?
1. Throttle Profile(Curve) set on speedo and flat on M11x(Throttle EXP and ARC).
2. Throttle Profile(Curve) set flat(liner) on speedo and adjusted on M11x(Throttle EXP and ARC).
3. Both of above.
I recently using pattern 2. It would be helpful if you could share how you setup your speedo and M11x.
Thanks.
I posted same question on Tekin RS thread but no luck so could anyone share some info.
I have M11x + Tekin RS for my 17.5 stock onroard.
how do you guys adjust throttle curve and related setting?
1. Throttle Profile(Curve) set on speedo and flat on M11x(Throttle EXP and ARC).
2. Throttle Profile(Curve) set flat(liner) on speedo and adjusted on M11x(Throttle EXP and ARC).
3. Both of above.
I recently using pattern 2. It would be helpful if you could share how you setup your speedo and M11x.
Thanks.
#1692
Tech Adept
Hi guys. I went racing yesterday and ended up going home early thanks to an issue with the range of my M11x.
It has been faultless until yesterday, but it just kept cutting out at the further point in the track (approx 100m max). I swapped out the receiver for a RX381 as I noticed a poor antenna wire on my RX451, but whist it was better, it still kept cutting out (like failsafe).
I changed the RX battery and it made no difference. I removed the side of the top of the TX but the aerial wire was fine???
Any ideas guys. I noticed the RX381 doesn't have the bared top on the antenna wire, so maybe it's not coax like the 451 and this affects the range, but I just don't know.
Could it be the antenna on the TX. It isn't broken and the small amount of wire visible looks fine, but I'm sure it can't be the TX itself as they are fairly indestructible in terms of their electronics.
Any help gratefully received (lol).
It has been faultless until yesterday, but it just kept cutting out at the further point in the track (approx 100m max). I swapped out the receiver for a RX381 as I noticed a poor antenna wire on my RX451, but whist it was better, it still kept cutting out (like failsafe).
I changed the RX battery and it made no difference. I removed the side of the top of the TX but the aerial wire was fine???
Any ideas guys. I noticed the RX381 doesn't have the bared top on the antenna wire, so maybe it's not coax like the 451 and this affects the range, but I just don't know.
Could it be the antenna on the TX. It isn't broken and the small amount of wire visible looks fine, but I'm sure it can't be the TX itself as they are fairly indestructible in terms of their electronics.
Any help gratefully received (lol).
#1694
Tech Fanatic
help with m11x calibration ti rs pro
Does any one know what i need to do to get my M11x to calibrate with my rs pro, I set my trims to middle(i quess tekin means 0) and epa's, dual rate set to max, throttle direction set to normal.
It still won't calibrate, neutral chimes, full trottle chimes if I set epa to 0, brakes will not chime no matter where i set the epa.
Does anyone have a suggestion? The rs pro is new. Carl
It still won't calibrate, neutral chimes, full trottle chimes if I set epa to 0, brakes will not chime no matter where i set the epa.
Does anyone have a suggestion? The rs pro is new. Carl
#1695
Hi guys. I went racing yesterday and ended up going home early thanks to an issue with the range of my M11x.
It has been faultless until yesterday, but it just kept cutting out at the further point in the track (approx 100m max). I swapped out the receiver for a RX381 as I noticed a poor antenna wire on my RX451, but whist it was better, it still kept cutting out (like failsafe).
I changed the RX battery and it made no difference. I removed the side of the top of the TX but the aerial wire was fine???
Any ideas guys. I noticed the RX381 doesn't have the bared top on the antenna wire, so maybe it's not coax like the 451 and this affects the range, but I just don't know.
Could it be the antenna on the TX. It isn't broken and the small amount of wire visible looks fine, but I'm sure it can't be the TX itself as they are fairly indestructible in terms of their electronics.
Any help gratefully received (lol).
It has been faultless until yesterday, but it just kept cutting out at the further point in the track (approx 100m max). I swapped out the receiver for a RX381 as I noticed a poor antenna wire on my RX451, but whist it was better, it still kept cutting out (like failsafe).
I changed the RX battery and it made no difference. I removed the side of the top of the TX but the aerial wire was fine???
Any ideas guys. I noticed the RX381 doesn't have the bared top on the antenna wire, so maybe it's not coax like the 451 and this affects the range, but I just don't know.
Could it be the antenna on the TX. It isn't broken and the small amount of wire visible looks fine, but I'm sure it can't be the TX itself as they are fairly indestructible in terms of their electronics.
Any help gratefully received (lol).