jrp

iTrader: (19)

We had 12 1/12 stock cars and 5 World GT cars today. Racing was great!.

jrp

iTrader: (19)

Well nobody else has shown up to run 1/18 scale. If we had a few we would certainly run them though.

jrp

iTrader: (19)

If you get a car and still cannot find any tires, we should have some available. I know a few of us has a personal stash we could share. Andy from Procar, our track owner, will probably have some soon also.

hrnts69

iTrader: (5)

WOW!!! 12 1/12th racers!!! I bet that was a fet to get into the main!

As for why i asked about the 1/18th class. Ive got a opportunituy to get a XRAY M18 for cheap. I think its even got the Exotech Conversion Kit on it already.

Sounds like a great day of racing!

Rick Vessell

iTrader: (10)

Jimmy,

Are you and Skippy running WGT now? I should have my car soon. Looks like we'll get to beat on each other here shortly.

Socko

action135

iTrader: (1)

finally found this dang thread!!
haha racing was great sunday, but i dont think i'ma make this wednesday though. back at it the soonest after though!

1/12 novice was pretty tight. me an brian were pretty tight. I gotta learn up on some passing skillz though haha

alphacat

iTrader: (7)

We are awaiting word on Jaco GT Spec tires but we do have a box of BSR's in different compounds for sale at a good price as well. Andy Wallace 618-319-0707

jrp

iTrader: (19)

Yes, Skip and I have cars now, and Bill E. and Larry Dean have cars on order. We have a couple other locals with 1/10 pan cars also.

Come on down and race with us!

aaron2u

iTrader: (75)

Hey Jim,
Not sure what direction I'm going here. I exhausting all avenues to find a GenX10, but I need just a little bit of info.

I've never ran 64 pitch gears before, so I don't have any in my box. For pinions, where should I hover around for 13.5 on 4 cells?

Also, 12th scale, same thing. If I can't find a GenX10 soon enough, I'll order a GenX as everyone has them in stock. Pinion starters for these as well for 21.5.

Thanks!

jrp

iTrader: (19)

I think we are running 96 tooth spur with a 35 pinion right now. Not sure if we are where we need to be or not yet. The kit comes with a 110 tooth spur I think, so a bigger pinion would be needed to get the same rollout. I am not sure what the biggest is that you can fit with that spur.

With the 1/12 17.5, we are running a rollout about 82 mm. I think I have a 45 pinion with a 76 spur, with a small tire. In Vegas, they were running 52/78 I think.

Not sure what you would need on a 21.5, but it is probably huge...

hrnts69

iTrader: (5)

What 1/12th foam tire compounds are they running down there? Just bought a CRC 3.1! How many people are running a brushed setup? Ill be sporting a Tekin G11 Pro with a CO27 motor!

jrp

iTrader: (19)

Purple Fronts

Grey/White/Pink/Yellow Rears (anything soft...)

A few of the new 1/12 guys are still running brushed setups. Speeds are all close btween brushed and brushless right now.

aaron2u

iTrader: (75)

I'll be at the track with about six 4-cell packs this wednesday and sunday. If anyone would like to cycle them for me, on the track of course, you're more than welcome... I'll even bring my chargers....

I just cycled them as 6 cell packs about 2 weeks ago at Redline in my B44, and I think the bad cells are weeded out. They are all 4200 packs, so it should be worth your time...

hrnts69

iTrader: (5)

We racing this Sunday? If so, is there anybody that would let me test drive there 1/12th car for a couple laps? Or is there somebody that has a spare car, that could rent one out to me? I never drove a 1/12th car yet. Raced a 1/10th Stock Foam Touring Car last year. But never drove a 1/12th.

Itll be a couple weeks before i get my CRC 3.1 up to race specs.

jrp

iTrader: (19)

Yes, we are racing this Sunday. Stop by and we will be happy to let you drive a 1/12 scale.