John St.Amant

iTrader: (1)

Thats ok.. I was bored and thought it might make for a comical read .

katfish317

iTrader: (6)

That is okay as I used the formula tonight on my offroad truck and multiplied it by Pie, and got the actual rollout that would let me triple a jump!

nocif13

MY SETUP FOR ASPHALT AND 13.5/LIPO
http://www.petitrc.com/reglages/team...er20090201.pdf

Tomradio

iTrader: (25)

thanks

msteeple

Hi guys, I just got an E4 RTR to get into electric racing and i must say, this car out of the box handles and drive like a dream , very impressive.

I have been racing Nitro for three years with the G4 family of cars and am now trying my hand an electric racing.

I have put a novak 10.5 brushless system in car am am trying various spur pinion combinations to find that sweet spot, currentlt running 110spur 40 pinion.

What Spur/Pinion combination you guys think would work best on this car.

Tomradio

iTrader: (25)

Gearing depends on a lot of factors, track size, ESC profile, motor brand, driving style etc... 110/40 is a good starting point. Check lap times, feel/speed, and motor temps above all.

microcrazy24

sorry i looked on the snowbird site but how did the e4 do? was the car that ran this year at the sb the same car that was on rctvlive.com? i heard the car they ran this year is another version? how many places sell e4 parts? thanks

msteeple

Thanks for your suggestion will start here and work my way down.

Track is medium size in length, and im using a novak 10.5 brushless system.

The Wease

iTrader: (63)

The E4 did really good most were driving the RS and FS there was 4 cars that made the A main:
17.5 Rubber
Trans Am
Mod Rubber
Mod Foam
2 cars made the B main
17.5 Foam
Mod Foam
4 cars made the C main
17.5 Rubber
17.5 Foam 2 cars
13.5 Foam
and 1 car won the D main in 13.5 foam

as far as the ability of parts wolfhobbies.com carries a full line of Team Magic parts

WEEZY

iTrader: (11)

I won the b main in 17.5 rubber to put it in the show

How you doing wease?

John St.Amant

iTrader: (1)

Way 2 go WEEZY!

The Wease

iTrader: (63)

Good how about yourself. You been racing since Birds? I'll be at Dave's home track (timezone) this weekend for a 2 day race it should be on liverc if you want to check it out.

Tomradio

iTrader: (25)

Any hints on what option parts Wolf is working on.

Nice job Weezy!

Eddie M

iTrader: (4)

Hello guys,


I broke the bumper post last time I ran my RS 009 and when I order the part "503145 Bumper Post Set", It is not the same part that came with the car and it doesn't quite fit properly. Does anyone know what the proper parts number for the RS 009 ?

Thx,
Eddie.

AreCee

iTrader: (1)

I take back what I said about the E4 shocks being OK to build. I had the cap strip off on and thought it was only the cap but the threads on the shock body are stripped also. Not cross threaded but stripped.

I ordered new caps and built the shock but the cap just spun without engaging the threads.

Time for some nice Tamiya or TC5 shocks.