Kyosho LAZER ZX-5 Rim/tire question
#1
Kyosho LAZER ZX-5 Rim/tire question
Hi, i have a ZX-5 i use on asphalt. Im using Pro-line dirt hawg 1 & 3 R/F
Im thinking of going with Panther slicks there low profile http://www.pantherteam.com/index.php...roducts_id=239
My question are there any other rims that fit the LAZER besides Kyosho's Like Losi Or something i could dye?
I have raced a lot of Touring cars, but with a 4WD on road car should i use softer spring & and shock oil. Also i replaced the center to a one way instead of all time 4WD any problems with doing that.
Thanks!
Im thinking of going with Panther slicks there low profile http://www.pantherteam.com/index.php...roducts_id=239
My question are there any other rims that fit the LAZER besides Kyosho's Like Losi Or something i could dye?
I have raced a lot of Touring cars, but with a 4WD on road car should i use softer spring & and shock oil. Also i replaced the center to a one way instead of all time 4WD any problems with doing that.
Thanks!
#2
Tech Elite
iTrader: (32)
For the zx5 you can get a proline conversion axle from kyosho that allows you to use losi and associated rear rims. The axles work with the cvd/universals but not the swingshaft/dogbones.
You an take out the one way, put a front diff. If you have a shaft oneway, there is a part to convert it to full 4wd.
I dont have any part numbers at the moment. Also, if you post this on the kyosho offroad thread, there are many people more knowledgeble than I that can assist you.
You an take out the one way, put a front diff. If you have a shaft oneway, there is a part to convert it to full 4wd.
I dont have any part numbers at the moment. Also, if you post this on the kyosho offroad thread, there are many people more knowledgeble than I that can assist you.
#3
For the zx5 you can get a proline conversion axle from kyosho that allows you to use losi and associated rear rims. The axles work with the cvd/universals but not the swingshaft/dogbones.
You an take out the one way, put a front diff. If you have a shaft oneway, there is a part to convert it to full 4wd.
I dont have any part numbers at the moment. Also, if you post this on the kyosho offroad thread, there are many people more knowledgeble than I that can assist you.
You an take out the one way, put a front diff. If you have a shaft oneway, there is a part to convert it to full 4wd.
I dont have any part numbers at the moment. Also, if you post this on the kyosho offroad thread, there are many people more knowledgeble than I that can assist you.
Thanks! i posted in the kyosho offroad thread.
#4
your better off getting the proline adapters
#5
Tech Elite
iTrader: (61)
For the zx5 you can get a proline conversion axle from kyosho that allows you to use losi and associated rear rims. The axles work with the cvd/universals but not the swingshaft/dogbones.
You an take out the one way, put a front diff. If you have a shaft oneway, there is a part to convert it to full 4wd.
I dont have any part numbers at the moment. Also, if you post this on the kyosho offroad thread, there are many people more knowledgeble than I that can assist you.
You an take out the one way, put a front diff. If you have a shaft oneway, there is a part to convert it to full 4wd.
I dont have any part numbers at the moment. Also, if you post this on the kyosho offroad thread, there are many people more knowledgeble than I that can assist you.
Checked on Kyosho America site and could not find them.
How about a link!
#6
Tech Elite
iTrader: (41)