Pinion gear
#1
Tech Initiate
Thread Starter
Pinion gear
Hi. New guy here. I was wondering what pinion gear to use to start with on my new Pro-2. I am running a 3600kv Castle and a Sidewinder esc with 2s LiPo. I intend to run it outdoors not necessarily on a track. TIA.
#2
Super Moderator
iTrader: (31)
Join Date: Nov 2008
Location: RIP 'Chopper', 4/18/13 miss you bud:(
Posts: 15,483
Trader Rating: 31 (100%+)
What does the manual say? Start there.
#3
While I haven't run that exact motor/esc combo, I ran something similar in a Pro-2 I built up for my son. As I recall, with the stock spur we were running 26-28t pinions. I can't find my notes at the moment, but I'm nearly certain.
You may try posting directly in the Pro-2 thread or there is also a Facebook page where the members are pretty active and can ask there.
-W
You may try posting directly in the Pro-2 thread or there is also a Facebook page where the members are pretty active and can ask there.
-W
#5
Tech Initiate
Thread Starter
I am so new I don't have the Pro-2 yet! Coming tomorrow. But I did look at the manual pdf. I didn't see anything so I thought I would ask here. With my Slash 4x4 I used a certain gear ratio between pinion and spur. Guess I will start with that ratio or close to it.