XRAY XB8 Thread
#61
Side view. (new better, bigger picture)
Last edited by Niklas Edlund; 07-20-2004 at 07:51 AM.
#62
Front diff in. (new better, bigger picture)
Last edited by Niklas Edlund; 07-20-2004 at 07:52 AM.
#63
Front box in place and lower arm also. (new better, bigger picture)
Last edited by Niklas Edlund; 07-20-2004 at 07:52 AM.
#64
The caster pivot ball pressed in the lower arm... (new better, bigger picture)
Last edited by Niklas Edlund; 07-20-2004 at 07:53 AM.
#65
Ok, thats all pics I have this evening - maybee some more in 24 hours when I have wrenched some more...!?
#67
I will not speculate regarding dates - all I know is that Xray is working their butts off in finalizing everything, like prices & partnumbers... etc. It will be ready when they are ready...
#68
Tech Elite
iTrader: (11)
That's cool..just someone had mentioned that they had received an email indicating that an announcement would be made by the 17th.
I'm kind of up in the air myself...I want one of these badly, but our local club races every other weekend until mid September. If it's not going to be on the shelves for another month or so, then I'll probably have to hold off until next year...hard to justify that much $$$ for just a couple of race days...
I'm kind of up in the air myself...I want one of these badly, but our local club races every other weekend until mid September. If it's not going to be on the shelves for another month or so, then I'll probably have to hold off until next year...hard to justify that much $$$ for just a couple of race days...
#69
Building the XB8 continues... Front C-hub with inclined king-pin angle. (new better, bigger picture)
Last edited by Niklas Edlund; 07-20-2004 at 07:53 AM.
#70
Upper arms have adjustable angle (to match the kick-up) and roll-center + they are slidable for compensated for the caster angle. (new better, bigger picture)
Last edited by Niklas Edlund; 07-20-2004 at 07:54 AM.
#71
Caster eccenter visible, this one is the #2 that will make maximum or minimum caster depending on how its turned. Its also a #0 wich has the hole in the middle and a #1 wich is in between. In total 5 different caster angles availabe right out of the box. (new better, bigger picture)
Last edited by Niklas Edlund; 07-20-2004 at 07:54 AM.
#72
The 5 mm thick rear 7075 T6 chassi brace. Bolted with 3 screws in chassi and 2 in tower. (new better, bigger picture)
Last edited by Niklas Edlund; 07-20-2004 at 07:56 AM.
#73
From the rear. (new better, bigger picture)
Last edited by Niklas Edlund; 07-20-2004 at 07:58 AM.
#74
Rear wing mount, new holes drilled - lowered Magnus Pålsson style... (new better, bigger picture)
Last edited by Niklas Edlund; 07-20-2004 at 07:58 AM.
#75
Side view. (new better, bigger picture)
Last edited by Niklas Edlund; 07-20-2004 at 07:59 AM.