MY NEW CARBON FIBRE TT-01
#1
MY NEW CARBON FIBRE TT-01
Hi,
I thought I'd show you my new 3Racing carbon fibre TT-01. I'ts fully hopped up with alloy parts from 3Racing and Yeah. I'm still working on getting it set up and for all those who say "it's still a TT-01", I can tell you that so far the setting up and handling couldn't be more different.
I'm looking forward to getting it running properly and I'll keep you posted with the progress.
Regards,
32819toon
I thought I'd show you my new 3Racing carbon fibre TT-01. I'ts fully hopped up with alloy parts from 3Racing and Yeah. I'm still working on getting it set up and for all those who say "it's still a TT-01", I can tell you that so far the setting up and handling couldn't be more different.
I'm looking forward to getting it running properly and I'll keep you posted with the progress.
Regards,
32819toon
#2
Tech Master
Its looking ace mate I think it will be good on our circuit as the chassis will be really stiff (like my Ta05ms).
Here is my set-up
FDR - 7.63
Front - Blue springs
yellow stabilizer
0 deg toe in
-2 deg camber
Rear - Yellow Springs
yellow stabilizer
3 deg toe in
-2 deg camber
You going to be racing this week?
Here is my set-up
FDR - 7.63
Front - Blue springs
yellow stabilizer
0 deg toe in
-2 deg camber
Rear - Yellow Springs
yellow stabilizer
3 deg toe in
-2 deg camber
You going to be racing this week?
Last edited by Qatmix; 07-13-2008 at 07:10 AM.
#3
Hello mate - good to see you on here. I missed out last week, but expect to be there this week, and hopefully over those little niggles I've had lately. My current set up :-
rear :-
0 toe
-2 camber
yellow springs
blue stabiliser
37 shore tyres
front
1 toe out
-2 camber
red springs
red stabiliser
40 shore tyres
Like I said in the earlier post, this is totally different to the tub cahssis set up, practically opposite !!
See you Thurs.
rear :-
0 toe
-2 camber
yellow springs
blue stabiliser
37 shore tyres
front
1 toe out
-2 camber
red springs
red stabiliser
40 shore tyres
Like I said in the earlier post, this is totally different to the tub cahssis set up, practically opposite !!
See you Thurs.
#4
woh..
that looks real good..
i dont seems to be able to get the 3racing deck from my LHS .
where did you get it from??
thanks in advance
that looks real good..
i dont seems to be able to get the 3racing deck from my LHS .
where did you get it from??
thanks in advance
#5
interestin indeed
R
R
#9
Alot say that, but I've just checked out the Tamiya usa website and the list price for that car is $897. A UK model shop is selling it at £315 which is about $600. I paid less that half of that price for totally upgrading my car, and it has left me with my original TT01 as a spare.
The way the TT01 works is that you buy a base car and put a couple of hop-ups in such as the bearings and driveshaft. From then you add a bit here and there to impove the car. By the time you decide to go for the carbon fibre chassis the choice of changing car to an out and out racer is too expensive. Our club is quite informal so the latest expensive car isn't needed.
Regards,
32819toon
#11
$400 as in $400USD for the Evo V mS right?