Truggy won't move!
#1
Truggy won't move!
I just finished putting together my kit and now im in the middle of doing the break in. When i apply throttle when the wheels are in the air they spin. But when I put the car on the ground and apply throttle it WON'T move!!
Anybody know what it is??
Anybody know what it is??
#2
Tech Elite
iTrader: (58)
My Novarossi did something similar when I was breaking it in....sounded like it should be turning fast enough to move the truggy, but it wasn't going anywhere. Just took a little more gas to get 'er going.
#3
Is it a kyosho and did you put one of the diffs in backwards?
#4
It's a Thunder Tiger ST-1 Pro and I didn't put the diffs in backwards because when the wheels are in the air and i apply throttle both of the wheels move forward. I think it was too rich because I leaned it out and now it moves, but it only moves about jogging-pace now
#5
new motor to in your truggy i take it, sounds like your onto it lean it enough so the clutch isn't slipping too much, it will get better as it warms up and runs in.