cleaning fluids
#1
cleaning fluids
i wanna order sum stuff from amain,
but i cant order nitro blast for internationally
so is the ta emerald nitro cleaner good?
is it better than the tinity nitro terminator?
but i cant order nitro blast for internationally
so is the ta emerald nitro cleaner good?
is it better than the tinity nitro terminator?
#2
Tech Fanatic
iTrader: (8)
This is what I use:
http://www.youtube.com/watch?v=8B7ASlKhDxc
Cheaper than buying Nitro Blast or other cleaners.
http://www.youtube.com/watch?v=8B7ASlKhDxc
Cheaper than buying Nitro Blast or other cleaners.
#3
Tech Master
iTrader: (4)
This is what I use:
http://www.youtube.com/watch?v=8B7ASlKhDxc
Cheaper than buying Nitro Blast or other cleaners.
http://www.youtube.com/watch?v=8B7ASlKhDxc
Cheaper than buying Nitro Blast or other cleaners.
#7
Tech Fanatic
iTrader: (14)
I use a brand called Techspray, it's their Ecoline Contact Cleaner. Been using it for a while on both my Truggy and Buggy and have not had any plastics damaged at all, and I've scrubbed just about if not all the plastics with it (I spray it on a tooth brush and scrub with it, doesn't harm the toothbrush bristles either)
#10
the diy rc cleaner...
i know its a cheap way to do it,
denatured alcohol(quart) and simple green and wd 40 can cost up to MYR 50 in malaysia, so i dont know if its cheaper here but maybe cheaper there.
i know its a cheap way to do it,
denatured alcohol(quart) and simple green and wd 40 can cost up to MYR 50 in malaysia, so i dont know if its cheaper here but maybe cheaper there.
#13
Tech Addict
iTrader: (7)
I always have a can of non-chlorinated brake cleaner handy for NON_PLASTIC parts. I use it to blast out the head before I put a glow plug in, or any time I rip into the engine. And I use it for bearings. It is not for cleaning the whole vehicle. Like others have said, simple green followed by WD-40 followed by the air hose is the ONE of best general maintance clearners around. But a can of brake cleaner is handy to have and cheaper than nitro blast. They do make a parts cleaner that is safe for electronics.