4LikesTamiya TRF416 / TRF416WE / TRF416X
09-12-2007, 11:09 AM
#31
another Tamiya!! wow this is going to kill TC.....
Just an xrayer having some fun!
Just an xrayer having some fun!
09-12-2007, 12:50 PM
#32
Tech Regular
09-12-2007, 01:19 PM
#33
www.rcmarket.com.hk
DEC release
TRF416 Chassis kit #42106
F oneway
37T pulley ,
18T center pulley,
2.25mm lower deck
2mm upper deck
45mm Swing shaft New type
New motor mount , & F & R bulkhead
5x10 ball bearing
09-12-2007, 02:32 PM
#34
www.rcmarket.com.hk
DEC release
TRF416 Chassis kit #42106
F oneway
37T pulley ,
18T center pulley,
2.25mm lower deck
2mm upper deck
45mm Swing shaft New type
New motor mount , & F & R bulkhead
5x10 ball bearing
Seems like the latest drivetrain tricks, coupled with new bulkheads... my guess is that the motor mount and rear bulkheads will be seperate pieces.
and 5x10 bearings.... finally!!!! :P
09-12-2007, 03:58 PM
#36
What is the big deal with the bearings?
09-12-2007, 04:37 PM
#37
09-12-2007, 05:03 PM
#38
09-12-2007, 05:50 PM
#41
09-12-2007, 05:52 PM
#42
Actually, this picture was already posted by our host:
http://www.rctech.net/forum/showpost...&postcount=123
So, this must not be it. Darn it, I can't keep track of all the changes to the 415.
http://www.rctech.net/forum/showpost...&postcount=123
So, this must not be it. Darn it, I can't keep track of all the changes to the 415.
09-12-2007, 06:36 PM
#43
Tech-Racing designed 416??????
If any of you know how Tamiya does business, you know they don't design (ALL)their cars they have Tech-Racing design and engineering of some of their cars. So, I went to Tech-racing web site and found a chassis that is coinsidentally 2.5mm lower and 2mm upper deck. It has an 18 tooth center pulley. The upper deck is lowered and the motor bulkheads are redesigned for this. It's called the MY-07. Here are some pictures and imagine it being blue and with less machining on the chassis to keep costs down. But if I was a guessing man it will be similar to this. Again this is just an educated guess!
Last edited by maxepower; 09-12-2007 at 10:15 PM.
09-12-2007, 09:22 PM
#44
If any of you know how Tamiya does business, you know they don't design their cars they have Tech-Racing does the design and engineering of their cars. So, I went to Tech-racing web site and found a chassis that is coinsidentally 2.5mm lower and 2mm upper deck. It has an 18 tooth center pulley. The upper deck is lowered and the motor bulkheads are redesigned for this. It's called the MY-07. Here are some pictures and imagine it being blue and with less machining on the chassis to keep costs down. But if I was a guessing man it will be similar to this. Again this is just an educated guess!
but your point is well taken
