MontanaMaxx

iTrader: (12)

I searched and couldnt find the right thread so here is my question.

I just picked up a used 1.0 and need a radio tray for it. I know its the same as the 1.0 buggy and hear that people put the 2.0 buggy tray in so is the 2.0 truggy tray the same and is this the route i should go? I also need throtle linkage so i was thinking an 8b 2.o radio tray and linkage and a 8t 2.0 fuel tank and i will be ready to rip. What do ya think

fatdaddy

iTrader: (4)

might as well get the chassis and cvd, and make it a complete set!

geejay

iTrader: (1)

What are you asking?

MontanaMaxx

iTrader: (12)

About the radio tray and if this is good there is question marks noting a question my bad if its not understandable

neobart

iTrader: (4)

If you get the 2.0 tray you need the 2.0 linkage set as well. The 1.0 set is too short.

MontanaMaxx

iTrader: (12)

well i have the 1.0 buggy and have had no trouble with the 1.0 tray so im thinkin just getting that one to save some money as i have the 1.0 linkage already. Is the 2.0 that much better?

pyromania

iTrader: (18)

Just make sure your EPA's are set right and shim your servos up following the manual.

The 2.0 tray is a bit stiffer and the servo was moved back. If you do get the 2.0 tray, make sure you dremel the mud guards on the servo side.

MontanaMaxx

iTrader: (12)

yeah on my 1.0 buggy i got the king headz tray stiffiner and i have had no problems it looks cool to so i will probably do that to the truggy also since it has a bunch of king headz parts already