sidekick91

iTrader: (4)

i have a modded picco p3 .28 and at high rpm it seems to load with fuel and die but if u just keep bumping the throttle it will go i have tried 3 different carbs on it and they all do the same anyone got any ideas

Shoaf85

iTrader: (19)

Have you tried a new glow plug?

sidekick91

iTrader: (4)

yes i have im using os p3 (turbo) and 20% sidewinder nitro fuel

Frank L

iTrader: (148)

Lean out the hsn and see what happens. If it gets worse then richen it. If you are lost go back to factory settigs and try again.

sidekick91

iTrader: (4)

ive tried both ways if i lean the high speed it just gets worse and if i richen it then it runs really bogish and does the same thing , i just ran it out side had to start it twice then i leaned the low speed a hair and it ran great for half a tank no problems then it died so i started it again and same problem again with dying at mid to high rpm

trevor15308

iTrader: (3)

how many gallons are on ur motor

sidekick91

iTrader: (4)

um not sure i bought it used i think the guy that i got if from said about 2 gallons on it then repinched and modded and then i but 2 tanks throw it sitting at 220f and then boged it around the yard at 1/4 throttle or so keeping the 220 temp then started or attempted to start to tune it but it dont matter if its to rich on the high speed or to lean it dies at mid to full throttle so i have not got very far with it