"ULTIMATEPOWER"

Andy, the 4200s are being processed, takes a bit, ive put up some stuff on the cart getting ready for them so they should be ready shortly

BillyCaldwell

iTrader: (32)

Good deal mike. Ive only ever ran pancar on concrete, it was pretty fun at the local track we used to have here. We ran 6cell stock on a bullring.

BillyCaldwell

iTrader: (32)

Slackers, not posting. LOL Yall dont gimme this work crap either I know how yall roll LOL

brians11

iTrader: (40)

i had a super busy day at work... thats my excuse...

BillyCaldwell

iTrader: (32)

Ok Ok your off the hook since you posted now. I see Pookyt lurking!!!

POOKYT

Brian-- Can you email me a good set-up for the T2 on asphalt? My buddy Brandon has his T2 and we are starting our outdoor season next weekend. Thanks man [email protected]

Brant

BritRacer

Do the IPs charge lower on their first charge??

I trayed them, but they peaked out at about 2880mah...

Typically I get a good first charge with the IBs...

BillyCaldwell

iTrader: (32)

I have not ran the IP's yet. You may ask Bob he has them. Probably just cycle them once and I bet they come right up. If not drop Chris an email.

"ULTIMATEPOWER"

New Products:
5 cell Hump Receiver Packs, 1200mah weight 4 oz $15.99

4 cell stick pack IP $ 18.99

Brahma/CWE Heads for 1/8th and 1/10th scale Typical CWE Colors Black:Green:Purple No silver on these heads $TBA

12 volt Distribution boxes $ TBA

Andy thats typical of the IP nature, once they sit for a while they wil do that, a couple of cycles or so will get them woke up and ready to rock

"ULTIMATEPOWER"

Sorry the Main one:

Bull Juice 17oz Motor Spray Industrial Strength $ 6.50

All pricing is suggested Retail..................
4200s Being Matched, will be available for public sale by middle of next week

TVMRocket69

iTrader: (9)

Andy I had that same problem with all 4 of mine. First charge tray to .9 charge will be low. If your not racing discharge between 20-30 amps. to 5.4 for 6cell pack If U will be racing within 7 days let them sit until then. On race day tray them again to .9 I use the smart tray and the Yokomo/Rayspeed tray. let sit for about 5 minutes and then charge at 6-6.5amps. And U should be fine. I use the Integy 16x9v6 charger and my IP's take over 4000mah and peak between 9.1-9.3 volts with a IR mid-low 20 according to the Charger. I use a .3mv/c cutoff. Cell's will stay below 9volts until they hit 3200+ mah then they jump to 9+ and level out. until the end.

JJ187RC

iTrader: (7)

Chris, you get the e-mail last night with the pics???? Let me know.

As for the packs, yes, they will be low until you get a few cycles through them. Mine stayed low for about 3-5 cycles and now they are takeing anywhere frome 4200 to 4500.

"ULTIMATEPOWER"

Yes sir u da man, very nice

"BULL JUICE" motor Spray now shipping

"ULTIMATEPOWER"

if anyone needs anything i can pretty much get anything.. wait R/C wise that is ... Losi, associated, CEN, Ofna, Mugen,GS , Integy, Far as pricing ask me, i dont try to screw anyone etc etc etc, Xray and corally coming soon

TVMRocket69

iTrader: (9)

What NO SCHUMACHER