World premier of Rsector RS6 Conversion kit for Tamiya TA06
03-16-2012, 01:43 AM
#1
World premier of Rsector RS6 Conversion kit for Tamiya TA06
After 180 days, the RS6, an amazing conversion kit for Tamiya TA06 is born. It was quite a challenge to reengineer the chassis because of its unique compact design where everything is accurately calculated but we managed to do it, and we made it better. The RS6 is a true conversion kit with performance, functions and form.
1.Its unique structure allow it to maintain stiffness without a permanent upper deck(When the removable upper deck is in place, additional stiffness will be added to the chassis)
2.Battery is now removed from the top with the removal of just two thumb screws
3.Specially designed one piece front steering bulkhead is connected to the chassis braces for a more rigid front end structure.
4.The rear chassis support is a critical part of the design because it is there to maintain the stiffness of the rear section and to protect the battery from the heat of the motor.
5.Redesigned aluminum motor bridges for wider selection of motors, high performance low profile cooling fan for better cooling.
6.Right handed servo for a better electronics placement and shorter ESC wires required.
9.Adjustable e-trays for different size electronics
10.Shorty pack ready
http://rsector.com/member/81980/eshop/DSC01451.JPG
http://rsector.com/member/81980/eshop/DSC01494.JPG
http://rsector.com/member/81980/eshop/DSC01496.JPG
1.Its unique structure allow it to maintain stiffness without a permanent upper deck(When the removable upper deck is in place, additional stiffness will be added to the chassis)
2.Battery is now removed from the top with the removal of just two thumb screws
3.Specially designed one piece front steering bulkhead is connected to the chassis braces for a more rigid front end structure.
4.The rear chassis support is a critical part of the design because it is there to maintain the stiffness of the rear section and to protect the battery from the heat of the motor.
5.Redesigned aluminum motor bridges for wider selection of motors, high performance low profile cooling fan for better cooling.
6.Right handed servo for a better electronics placement and shorter ESC wires required.
9.Adjustable e-trays for different size electronics
10.Shorty pack ready
http://rsector.com/member/81980/eshop/DSC01451.JPG
http://rsector.com/member/81980/eshop/DSC01494.JPG
http://rsector.com/member/81980/eshop/DSC01496.JPG
| + YouTube Video | |
Last edited by R-Sector; 03-16-2012 at 01:46 AM. Reason: video not showing
03-16-2012, 04:50 AM
#2
Looks pretty sharp. It's a shame we have to clutter these things up with electrics. Good luck.
03-17-2012, 10:58 AM
#3
Tech Master
That looks fantastic!
03-19-2012, 01:22 AM
#4
Tech Addict
Amazing
04-01-2012, 04:17 PM
#5
Any more update on the conversion kit? Is it available in the shops? Any picture with electronics installed?
04-01-2012, 04:40 PM
#6
That is a really nice conversion kit. Price and where to buy?
04-01-2012, 07:29 PM
#7
What's the dimension of the battery compartment?
04-02-2012, 05:34 AM
#8
04-04-2012, 12:37 AM
#9
Battery compartment - 139.3mm x 48mm x 28mm
04-09-2012, 08:09 AM
#10
In Stock now
04-10-2012, 04:13 AM
#11
Tech Initiate
TA06 is such a great creation
06-19-2012, 11:51 AM
#12
Its finally in stock!!!
05-29-2013, 11:22 PM
#13
No post in a year and no real review.
I take it the exotek ex06 is better?
I take it the exotek ex06 is better?
06-05-2013, 07:36 AM
#14
limited quantities only @$79.99
06-06-2013, 05:03 PM
#15