Adam Drake talks about the new 8ight 2.0
#317
What 8ight clutch shoes would you guys get for maximum life/miniman wear? Right now the have the KH 7075 alum in my cart at amain with green and gold springs, but I was wondering if the Dynamite Max-Life shoes last longer? This will just be for practicing at tracks and want long life out of them. They came with 4 aluminum shoes and I thought it hate alot of bite even though the seller said the clutch shoes were really worn.
#318
What 8ight clutch shoes would you guys get for maximum life/miniman wear? Right now the have the KH 7075 alum in my cart at amain with green and gold springs, but I was wondering if the Dynamite Max-Life shoes last longer? This will just be for practicing at tracks and want long life out of them. They came with 4 aluminum shoes and I thought it hate alot of bite even though the seller said the clutch shoes were really worn.
#319
#321
you can but you don't have to. Sometimes I run all 4 in my truggy, in my buggy I run 2 carbon and 2 max life shoes. You'll find the 2 carbons last much longer with max life shoes than they would with regular aluminum shoes. just make sure you don't use a clutch bell thats been all galled up already from aluminum shoes becuase it will tear threw the carbon shoes like a hot knife threw butter
#322
i have been having problems with my rear camber links getting out of adjustment. i replaced them with another set, and still having problems. is there something/measurement to know which ones are good?
#323
#324
Tech Rookie
I put two nuts on the end and tighten them down against the plastic after I set the camber. The plastics can not slide on the turnbuckles that way. Sometimes though, they pull out completely if I hit hard. Nothing I can think of to fix that though. Epoxy maybe.
#325
Me too. Front and rear seem to slide. The threads are not holding up when you hit something. Harder or stronger plastic would help, I guess.
I put two nuts on the end and tighten them down against the plastic after I set the camber. The plastics can not slide on the turnbuckles that way. Sometimes though, they pull out completely if I hit hard. Nothing I can think of to fix that though. Epoxy maybe.
I put two nuts on the end and tighten them down against the plastic after I set the camber. The plastics can not slide on the turnbuckles that way. Sometimes though, they pull out completely if I hit hard. Nothing I can think of to fix that though. Epoxy maybe.
#326
Tech Rookie
What don't you undersand Integra? The turnbuckles thread into the plastic ends. The threads are too fine, I guess, and when you hit something the threads slip. Its like stripping plastic.
The turnbuckle link becomes shorter or longer.
The turnbuckle link becomes shorter or longer.
#327
If they are new there shouldn't be a problem.
#328
You can run the bigger 1.0 camber links. They will hold up to more abuse.
#329
Uff....i forgot i was in the 2.0 thread....so the smaller version camber links are moving ?
#330