Losi 8ight building and setup
#6391
In this spy shot of the lightened outdrives there is something wrapped around the Hinge Pins, or fitted over them. Can anyone tell me what it is and why it's there. I'm guessing it's to protect the open part of the Pin, but why?
Last edited by LosiMadMan; 04-15-2008 at 05:49 AM.
#6392
hrmm...i dunno what those could be for......I do spy the wing mount mod tho...with longer nuts to capture the bottom mount....I reccomend it.
#6393
You wouldn't happen to know the length of that screw for the wing mod do you?
Thanks in advance...
Thanks in advance...
#6395
Tech Elite
iTrader: (17)
It looks to be something like the ballstud/ ballcup foams used on the Losi XXX-NT series , used to keep dust and dirt out.
Losi "Foam Things"
Losi "Foam Things"
#6396
Tech Master
iTrader: (110)
I also had problems finding this information. I have it somewhere now, but what I ended up doing was just taking off the stock piece and lining it up with the new brace. I just placed the inserts in the direction where the holes lined up the same and started from there.
#6397
Tech Adept
if memory serves me right you use the 0 degree inserts and thats the factory settings
#6398
Tech Initiate
iTrader: (9)
For Buggy and Truggy you want to run 0's on the front end.
1ups for anti squat on the rear of both Buggy and Truggy.
Truggy rear toe, 1's in. Buggy rear toe 0's
Buggy front braces 0's - 0's....rear braces 1up's - 0's
Truggy front baces 0's - 0's....rear braces 1up's - 1in's
1ups for anti squat on the rear of both Buggy and Truggy.
Truggy rear toe, 1's in. Buggy rear toe 0's
Buggy front braces 0's - 0's....rear braces 1up's - 0's
Truggy front baces 0's - 0's....rear braces 1up's - 1in's
#6400
The foams around the hinge pins in between the arms are for keeping dust out as said prevoiusly.
#6403
Tech Regular
Dsl here are the instructions for the adjustable plates. Currently I run 2.5* toe in and 3* antisquat.
http://www.losi.com/ProdInfo/Files/L...stallation.pdf
Has anyone tried the setup I posted from rcsetups.com? I would like to hear from those who have tried it.
http://www.losi.com/ProdInfo/Files/L...stallation.pdf
Has anyone tried the setup I posted from rcsetups.com? I would like to hear from those who have tried it.
#6405
Tech Apprentice
iTrader: (1)
I'm racing a Mugen Prospec right now and I'm thinkin hard about getting a Losi for this season. You guys think that Losi will come out with an entirely new buggy or just upgrades for the Worlds? I don't really wanna get a brand new car for this season for it to be a new kit altogether for next year.