Integra

iTrader: (8)

Simple green mixed with Methyl hydrate alcohol for General purpose cleaning.

Kalgard for the rest.

morkendi

iTrader: (1)

I do the combo of simple green, denatured alcohol, and wd40 plus air. Hit with wd 40 again after. Every once in a while I pull the electronics, tank, and mill and break out the hose as well. I also have an ultrasonic jewelry cleaner my mom had before she passed that I use alot.

chicky03

iTrader: (1)

S100 or Honda Brite for cleaning, Maxima SC1 for shine!

Dlewis4

iTrader: (148)

He said Premium.

Kal Gard. Nuff said.

PaulL5156

Alcohol, pledge and Compressed Air.

Jason Pelletier

iTrader: (33)

Amen brother. Sc1 is dialed !!

merdith6

iTrader: (3)

and WD-40...

pointforward

For quick cleaning in between heats, Simple Green, air, and Mumeisha cleaning clay for the stubborn bits.

Spads11

iTrader: (33)

+1 on the s100, but it's expensive as heck.

JBURCH

iTrader: (2)

Kalgard plain and simple.

WIITA

iTrader: (43)

I'm new to 1/8. Do you usually dilute the simple green with water? Thanks!!

Integra

iTrader: (8)

Yes, If you read the label, It can be diluted A LOT.

I do a mix of 1/2 water 1/2 Simple green and add about a cup or so of the Methyl. Careful when adding the methyl as it will create a chemical reaction and get extremely hot with the water and simple green and formulate Fiberglass sized crystals which aide in the cleaning process. If you use too much methyl it will clog the pump on the bottle.

Mr.juarez

iTrader: (37)

never have used simple green here, but all i use is pledge or pam. mud comes right off when you brush it or blow it

Beddo

In the UK we dont have Simple Green (that I know of) but we do have Pledge, however, are you talking about the furniture polish, or am I thinking of the wrong thing?

adrictan

iTrader: (10)

Yr Pledge looks different from mine but yes, it's the furniture polish.