Fullthrottle Motorsports
10-02-2008, 05:26 PM
10-02-2008, 06:54 PM
True, but it is all preference. They just need different set-ups. It is like the people that say the DB12R can't handle well on carpet... it just needs a crazy un-conventional set-up.
10-02-2008, 07:54 PM
Tbar/spring
Well we have been testing both for a while,we have found that both will work well in all conditions but setup is key.
We have spent many hours with this design and have found it to do a great job on all surfaces,we now most racers will use the car on high bite carpet and that is were we have been doing most of our testing,We will releases other parts for the asphalt but the first version is ready for the rug.
We have advanced the performance of the tbar with central weight bias which will allow the car to get back to center faster increasing corner speed.We are also testing some other dampner tubes that will allow you to change the cars dampening with out changing tbars
We have spent many hours with this design and have found it to do a great job on all surfaces,we now most racers will use the car on high bite carpet and that is were we have been doing most of our testing,We will releases other parts for the asphalt but the first version is ready for the rug.
We have advanced the performance of the tbar with central weight bias which will allow the car to get back to center faster increasing corner speed.We are also testing some other dampner tubes that will allow you to change the cars dampening with out changing tbars
Last edited by Local racer; 10-02-2008 at 08:05 PM.
10-03-2008, 07:03 AM
Wow, it's good to see a local, small company doing big things...
Local racer I hope to see Full Throttle make a big waves in the 1/12 scale world and I'm on board for the ride. Question, what have you guys found out when testing the different front ends the car can use???
Local racer I hope to see Full Throttle make a big waves in the 1/12 scale world and I'm on board for the ride. Question, what have you guys found out when testing the different front ends the car can use???
10-03-2008, 08:04 AM
Thanks
Other features
New Hpi Style shock
Light weight teflon coated pivot balls for smooth t bar action
We are building this to be a racers car right out of the box
More knews to follow
New Hpi Style shock
Light weight teflon coated pivot balls for smooth t bar action
We are building this to be a racers car right out of the box
More knews to follow
10-03-2008, 09:19 AM
Tech Elite
iTrader: (20)
Join Date: Sep 2001
Location: MEMBER OF THE "MWC" Mimi Wong Clan
Posts: 2,442
Trader Rating: 20 (100%+)
Teach, i guess we will be seeing Local Racer more often this racing season... Good the more the merrier.
Glad things are in the "works" for the Team.
Arv.
Glad things are in the "works" for the Team.
Arv.
10-03-2008, 09:41 AM
Thanks Arv I am sure I will have to stop by a few times,Congrats on the new one I am sure you are having allot of fun.
10-03-2008, 11:01 AM
we test all the motors matter what they are .speed passion . hacker
trinity . they are like any other motor . ones better then the other
even ift they are the same turn
i remove the bearings and they are treated if they are no good i replace them trust me if you spin a motor makes noise its comming from the
bearing s . out of a stack of motors i run into 2 to 4 motors that the
bearing are bad
then we advance the timmig to make sure you have max power out of the motor
whats funny im still tuning brushed motor
on the car kit we are still working on it . we will be testing and
making changes in the next week or so, until we feel this car can be one of the best out there....
so after the testing . make the final changes we feel best for the car ,we will have it on the site soon .
trinity . they are like any other motor . ones better then the other
even ift they are the same turn
i remove the bearings and they are treated if they are no good i replace them trust me if you spin a motor makes noise its comming from the
bearing s . out of a stack of motors i run into 2 to 4 motors that the
bearing are bad
then we advance the timmig to make sure you have max power out of the motor
whats funny im still tuning brushed motor
on the car kit we are still working on it . we will be testing and
making changes in the next week or so, until we feel this car can be one of the best out there....
so after the testing . make the final changes we feel best for the car ,we will have it on the site soon .
Wow thats alot of testing and stuff for each motor! THat means it must be fast right!
10-03-2008, 11:46 AM
Tech Legend
iTrader: (51)
Join Date: Sep 2001
Location: Castle Mamba Max Pro. Feel its power!!!!!!!!!!
Posts: 21,220
Trader Rating: 51 (100%+)
Bill you have PM.
10-03-2008, 11:50 AM
uh oh, reigle might be gettin the feelin again. the dirt might have lost its luster.
R
R
10-03-2008, 12:54 PM
Time for a come back reigle....
10-03-2008, 03:59 PM
Who is doing the manufacturing on the 1/12th?
10-03-2008, 05:04 PM
Bill check your email. Package went out today. U should have monday.
10-03-2008, 05:33 PM
I sent you a pm bill
10-03-2008, 07:11 PM