Schumacher Mi4
#1306
Tech Adept
Because with the bearing protruding from the hub, running the narrow hex makes the offset the same as the rear.
#1307
Ok thanks guys.
Can i just take a pair off the mi3? Are these narrow enough?
Can i just take a pair off the mi3? Are these narrow enough?
#1308
Tech Apprentice
The narrow hex reduces the offset between the king pin and the hex. Generally it gives more steering.
All the top UK team run with this set up with 2.5-2.75mm of washers against the pivot block.
Std hex in the rear with 1mm washer against the block.
All the top UK team run with this set up with 2.5-2.75mm of washers against the pivot block.
Std hex in the rear with 1mm washer against the block.
#1309
Ha was just flickin through the manual and clocked your in the back
Yer just noticed now you and Grainger wrote Narrow Hex U3570 under driver notes. Ill have to snap a pair up soon. By standard in the rear do you mean the ones that come with the kit?
You also wrote under tyres Sorex 28 JB, i usually use the 28's a lot but i dont think theyre JB. Whats the difference?
Get to try it out for the first time tommorow woo
Yer just noticed now you and Grainger wrote Narrow Hex U3570 under driver notes. Ill have to snap a pair up soon. By standard in the rear do you mean the ones that come with the kit?
You also wrote under tyres Sorex 28 JB, i usually use the 28's a lot but i dont think theyre JB. Whats the difference?
Get to try it out for the first time tommorow woo
#1310
Tech Master
iTrader: (9)
Schumacher on the tube.
Adam did you happen to catch Robin Schumacher on www.rctvlive.com?
He is on the latest episode. What were you doing back then?
Enjoy.
He is on the latest episode. What were you doing back then?
Enjoy.
#1311
Tech Adept
#1312
#1313
Tech Adept
Ha was just flickin through the manual and clocked your in the back
Yer just noticed now you and Grainger wrote Narrow Hex U3570 under driver notes. Ill have to snap a pair up soon. By standard in the rear do you mean the ones that come with the kit?
You also wrote under tyres Sorex 28 JB, i usually use the 28's a lot but i dont think theyre JB. Whats the difference?
Get to try it out for the first time tommorow woo
Yer just noticed now you and Grainger wrote Narrow Hex U3570 under driver notes. Ill have to snap a pair up soon. By standard in the rear do you mean the ones that come with the kit?
You also wrote under tyres Sorex 28 JB, i usually use the 28's a lot but i dont think theyre JB. Whats the difference?
Get to try it out for the first time tommorow woo
The Sorex tyres with the JB have a foam insert in rather than the grey rubber insert in the other type available. The JB version has more grip, and equates to being about half a second a lap quicker. This is on carpet, I wouldn't like to say what they are like outside.
Keep us posted on how you get on with the car, good luck!
#1314
Thank you for the replys John and Seaball.
In a couple of hours ill be trying kit setup but next week ill order some narrow hexes and stick the spacers on the front and give that a blast
Thanks again
In a couple of hours ill be trying kit setup but next week ill order some narrow hexes and stick the spacers on the front and give that a blast
Thanks again
#1316
Tech Fanatic
iTrader: (1)
#1317
Tech Fanatic
iTrader: (3)
Use search function next time on shumacher's site http://www.racing-cars.com/pp/New_Ca..._CF/U3570.html
thanks!!
So I am assuming the U3570 are like the U3221 but o-ringed?
#1319
2991 - 3.9mm wide (mi2ec through mi3.5 kits - oring style)
3221 - 3.9mm wide (slip-on, no o-ring, released for mi3)
3525 - 4.9mm wide (mi4 kit - oring style)
3570 - 3.9mm wide?? (no idea what's different)
#1320
Tech Fanatic
iTrader: (3)
here's a quick (but incomplete) synopsis: (and in chronological order)
2991 - 3.9mm wide (mi2ec through mi3.5 kits - oring style)
3221 - 3.9mm wide (slip-on, no o-ring, released for mi3)
3525 - 4.9mm wide (mi4 kit - oring style)
3570 - 3.9mm wide?? (no idea what's different)
2991 - 3.9mm wide (mi2ec through mi3.5 kits - oring style)
3221 - 3.9mm wide (slip-on, no o-ring, released for mi3)
3525 - 4.9mm wide (mi4 kit - oring style)
3570 - 3.9mm wide?? (no idea what's different)