Kyosho Inferno GT, GT2 Race Spec
#796
#801
Jim, the upper shock mounts are installed by running the long screw through you choice of mounting position, and then a nut is threaded on from the other side of the tower. This locks the upper mount in place and keeps the proper spacing for the shocks.
#803
#804
Jim, I think it's possible to flip the screw around and install it from the back side, threading into the molded upper suspension mount. It's a little annoying to have to remove it when it comes time because the screw head will not be easily accessible. The alternative is to go with a 40mm hinge pin, which is IF111-40. I hope that helps. Our customer service dept. was also looking into this separately, so they should be in contact with that information.
#805
Tech Adept
iTrader: (3)
Jim, I think it's possible to flip the screw around and install it from the back side, threading into the molded upper suspension mount. It's a little annoying to have to remove it when it comes time because the screw head will not be easily accessible. The alternative is to go with a 40mm hinge pin, which is IF111-40. I hope that helps. Our customer service dept. was also looking into this separately, so they should be in contact with that information.
#806
Jim, I think they sell them separately so you don't have to buy new hinge pins if you already have them, or if they weren't damaged. It saves the extra cost of the hinge pins if you don't need them. Then again, if you've hit something hard enough to bend that shock tower, you're probably going to need new hingepins too. I agree - if it were my call, perhaps it would be better to include them in the package. I at least hope you get your car up and running soon.
#807
Jim, I think they sell them separately so you don't have to buy new hinge pins if you already have them, or if they weren't damaged. It saves the extra cost of the hinge pins if you don't need them. Then again, if you've hit something hard enough to bend that shock tower, you're probably going to need new hingepins too. I agree - if it were my call, perhaps it would be better to include them in the package. I at least hope you get your car up and running soon.
#808
#809
PRE-ORDER IS NOW UP UNTIL NOVEMBER 24TH FOR THE GTR,FERRARI 458 AND MACLAREN MP4 LONG CHASSIS BODIES CHECK OUT RCSHOX.COM!
#810
Tech Apprentice
Does anyone know if Anti roll bars is included in the Kyosho Inferno GT2 Race spec? I've been looking at pics from diffrent stores but couldn't really see.
Cheers!
Cheers!