Serpent S411
#2794
Tech Elite
iTrader: (24)
http://www.amainhobbies.com/product_...-Linkage-Rings
#2795
Tech Regular
iTrader: (21)
When referring to wheelbase, in specific rear wheelbase I read 4mm and 5mm as common spacing. How is that being determined? I have 4mm in front of wishbone (a 2mm and 2, 1mm spacers) and I have a single 2mm spacer behind (toward rear).
sorry If I made this confusing.
sorry If I made this confusing.
#2796
When referring to wheelbase, in specific rear wheelbase I read 4mm and 5mm as common spacing. How is that being determined? I have 4mm in front of wishbone (a 2mm and 2, 1mm spacers) and I have a single 2mm spacer behind (toward rear).
sorry If I made this confusing.
sorry If I made this confusing.
#2797
V2 steering rack
This is what it looks like when you flip the arms.
Last edited by Johnny Wishbone; 01-01-2013 at 05:40 PM.
#2798
Bumper mod
This is what I made to fix the bumper flex that can break the front of your chassis.
Last edited by Johnny Wishbone; 01-01-2013 at 05:40 PM.
#2800
Tech Regular
iTrader: (16)
V2 Steering Rack
Myself and James Reilly tested this change thoroughly yesterday night during our race day to find this change to help a ton with consistency and smoothness of steering travel from left to right. We found we were not only able to pick up a little time per lap by the car being easier to drive, we were also able to hold our line with no problem. At the beginning of the race day with arms standard we noticed we were close to pace but lap times showed we weren't consistent. Showing 10.15 for top5 10.25 for top 10 and 10.38 for top 20 which usually neither have our averages spread that far apart. Once we made the change of flipping the arms we saw averages like 10.12 for top 5 10.19 for top 10 and 10.24 for top 20. We also have to contribute the faster times with us learning the new layout a little better and finding a better setup but no doubt in our minds that when you flip the arms it definitely helps when you want to smooth out steering and help with consistency. Honestly made the car a little easier to drive.
-Alston Kelso
-Alston Kelso
#2801
?
I ASSUME YOU ARE REFERING TO THE STEERING ARMS? IN THE CENTER WITH THE ACKERMAN PLATE?
I LIKE THE BUMPER MOD. I DESTROYED A 2MM CHASSIS BECAUSE OF BUMPER FLEX. I KEPT THE CHASSIS AND WILL CUT IT UP TO DO THIS. GOOD IDEA ON THAT DESIGN
I LIKE THE BUMPER MOD. I DESTROYED A 2MM CHASSIS BECAUSE OF BUMPER FLEX. I KEPT THE CHASSIS AND WILL CUT IT UP TO DO THIS. GOOD IDEA ON THAT DESIGN
#2805
Tech Adept