The Black Kat

If the Quantum 2 performs anything like the old one I wouldn't touch it with a ten foot pole (atleast in stock)

I couldn't help but notice two things about Jonas TC3

1. He appears to be running harder springs in the back..in the rain....

2. That electronics cover looks like one of those cream-filled Hostess-brand cupcakes

Johnnytc3

iTrader: (1)

He is not using Associated shocks and springs.

The Black Kat

I know hes using those Tamiya shocks

A white Tamiya spring is stiffer than a blue Tamiya spring

J-P

a TC4 nah, an evoloution ???????

J-P

John Hughes

Hi do you tend to run alloy diffs in mod and if so would i get away with using one just on the rear as i usually run the back loose but this causes me to melt diffs almost every meeting
cheers John

dragoneuh

I am just sharing the info that i read on the Xtreme RC Car Magazine. It's on the Touring Corner Section.

SuperRooster

Does anyone have a good mod setup with foams? Thanks

Smalls

Anthony....... nice run in Stock last week, If I can keep a diff in my mod car with out exploading, I am comming for you !!! lol


See you soon

Brian McGreevy

iTrader: (10)

Run metal diffs. They won't get crunchy and lock up.

SuperRooster

Thanks, now only if my mod car would run as good as my stock

lem2

iTrader: (6)

Someone agres with me!!!!
I thought I was the onlt TC3 owner who use meteal diffs.

John Hughes

Cheers do you tend to run the irs pin cusions or are they not really necessary cheers John

RcRacerX

Ive been racing now for about 1 /12 to 2 years. I normally race my tc3 on carpet with rubber tires. I love my car overall, as it handles very nuetral and so long as my old batteries can keep up, my racer kit tc3 can keep ahead of all the expensive X-rays, losi's and just about anything else on the track.
But here's the problem, my car has a real bad issue of snapping the front out drives. I run open diffs with a center one way. I have tryed taking the front plastic dog bones out and replaced them with steel ones. I have checked all the screws and all of them are nice and snug. There are no binds in the drivetrain, and I typically run iether stock or spec 19T, but with iether class I still have the same issues. I have 2 tc3's, and this issue was in my first car, so after replacing the whole front end, I bought a new racer kit and after a month the same issues came back. I'm completly stumped. Some times I do brush up against a wall, but a losi can hit it harder and still keep goind. Any insite will help. Oh yea....my new tc3 has gen 2 everything on it with no graphite what so ever.

RcRacerX

I also run my front diff a little on the loose side try try and get some extra "forgiveness" for the front diff.

crACkeD ChaSsiS

iTrader: (4)

hey guyz my tc3 has been sittin up for a mnth now. im wondering if i go to race my car would i have to resetup my car>??!? friends telin me ill have to? so ny answers would rreally help.