Fasttrak

Sounds interesting, having only gotten back in the sport after quite an absence and the last run was nitro I am having a blast with the e-tc class of cars. Hobby World racing leaves Saturday and Sunday free to run elswhere, just not too sure what other tracks in the area offer a good atmosphere and down-to-earth folks. Over the last couple weeks I can see some driving ability slowly eeking back into my sledgehammer trigger finger, and should get the car working better by about the time I get the Demon 2 on my doorstep

If you have a link with some photos of that race track, times they race and what affiliation the track is, would much appreciate.

acloco

As requested:

http://www.speedworldraceway.com/

I will probably be out this Saturday......I need some stick time with this chassis.....after the shock oil & caster changes.

Fasttrak

Thanks a ton for that link, acloco.

howard hudson

ok axiom ya talked me into it I put the swing rack in the car. its test will be on saturday hope its as smooth as you say it is. if not Iam coming ta get ya

Fasttrak

Does using the NTC3 steering pose any space troubles at the front of the car? It would seem to be further back then the stock rack setup. It already seems pretty crowded with a fairly large GT7 speed control, 9402 servo and XXXTRA receiver. Curious what those with the Demon chassis conversion and the NTC3 swing steering think.

James Nguyen

no space troubles

ZER01

No space troubles BUT your ackerman changes for the better which might be a good thing for the eletric, I found that it is still NEAR or perfect Ackerman on the NTC3. AE makes awesome onroads.

Brian McGreevy

iTrader: (10)

No there are not any space troubles with the nitro rack, less if anything; the rack itself is smaller.

HARLEY

any news on the demon 2

Art Jensen

iTrader: (3)

We are still testing. Look for release to be 6-8 weeks. We will keep you posted on the progress.

speedxl

victor its me hector the car is coming along fine i just got back in to town check your private message ive sent you my contact numbers i have some info for you about the car. by the way its working good. tring to get it ready for the snow birds

Fasttrak

I should not even look in this thread. Only makes the wait more painful, but more then happy to wait for a completely dialed in chassis. Just make sure them battery slots is nice and spaced to be as close to the centerline using GP 3300 and not shorting out the bbattery bars. Oh yeah, make it nice and stiff for the carpet

speedxl

fastrack do you have a demon and are having set up issues or what! if you need help i ll give you a good setup!

Fasttrak

Yes, I am having setup issues with my Demon2, Victor has yet to ship it to me

OHBRAD

iTrader: (19)

Can someone tell me where i can buy the warp speed products other then from the original source, is there any hobby shops that stock the TC3 Blue printed gear cases.