mcgrath280

iTrader: (1)

Just bought a 1/8 scale buggy. I had a Team Checkpoint charger and balancer. I just purchased a Losi lipo 2000mah receiver pack not thinking I might have trouble finding the wires to plug into the TC balancer and plugging into the losi receiver pack. After i got it I cant seem to find the leads or any information on what to use. Does anyone have this setup or know of leads that will fit the TC balancer and the losi lipo pack?

pballer2777

iTrader: (28)

i'm runnin into the same problem. i have the hyperion charger and i bought what said was the losi bal board. but the boards smallset plug is 4 wires and the battery is 3 wires. i'm thinkin of changing the conector on the battery to one that fits the board.

Frank L

iTrader: (148)

The losi balance plug uses the thunder power type it does have an extra pin but if you use the #1 pin on the balance connector and leave the last pin open it works perfectly. I use a losi 4s in my starter boxes and a Hyperion charger. It works perfect. The Hyperion charger will let you know if you have it plugged in wrong. Just make sure you use the correct # Cel on the balance connector.