STS .28 pull-start engine
01-26-2006, 07:59 AM
#361
Originally Posted by jfc_tech
gear up...meaning use bigger CB with the 47T spur or get the new steel spur from HPI. Use higher visc diff fluid 10K or more. and ready yer roll cage or spare engine head. it willy like crazy. the torque is crazy...so be warned! 
how is your tranny holding up? and shafts?
thanks.
Oscar.
01-26-2006, 08:54 AM
#362
Originally Posted by Edgar Millenium
Hi Dino!!
Any new on the 28 that I sent you?? From Porject Zen?
Thanks
Edgar.
If you need a to send you a copy of the email regarding the engine, please let me know
Any new on the 28 that I sent you?? From Porject Zen?
Thanks
Edgar.
If you need a to send you a copy of the email regarding the engine, please let me know
We will start to holiday from 27,Jan. to 5,Feb. for Chinese New Year. I hope I can catch up otherwise you have to wait till 6,Feb......
01-26-2006, 09:02 AM
#363
Tech Initiate
Hello Dino!! Happy Chinese New Year!!! I was about to buy the 28 today but had trouble finding the blackplate (#280106), would you happen to know where I can pick one up in HK? I was even told by one shop that I had to change the crank to make it a non pull start! Hummmmmmmm
I need a non-pull start version of this to mount on my CRT
Thanks~
I need a non-pull start version of this to mount on my CRT
Thanks~
01-26-2006, 02:39 PM
#364
Originally Posted by crunch123
Hello Dino!! Happy Chinese New Year!!! I was about to buy the 28 today but had trouble finding the blackplate (#280106), would you happen to know where I can pick one up in HK? I was even told by one shop that I had to change the crank to make it a non pull start! Hummmmmmmm
I need a non-pull start version of this to mount on my CRT
Thanks~
I need a non-pull start version of this to mount on my CRT
Thanks~
Happy Chinese New Year!!! 恭喜發財!!!
Please contact with our Hong Kong Distributor:
Hoomark Trading Co.
G/F C, Richview Villa,#20 Fung Fai Terrace,Happy Valley,Hong Kong
Contact : Daisy Kwok
TEL/FAX : (852)2575 1777
e-mail : [email protected]
No need to change the crank,just need a .28 standard backplate(#280106).
X1CRT is very cool,my vehicle is X1CR w/D21T lately
01-26-2006, 05:24 PM
#365
Tech Initiate
Hey Dino, thanks for the info. I'll be contacting them today.
The X1-CR is very cool~~~ I can't wait to get my CRT up and running in the CNY holidays (Let's hope they have the backplate).
The X1-CR is very cool~~~ I can't wait to get my CRT up and running in the CNY holidays (Let's hope they have the backplate).
01-26-2006, 07:29 PM
#366
Tech Regular
DINO:
Email Sent wuith my address.
Email Sent wuith my address.
恭祝大家新春快乐、身体健康、合家幸福、心想事成！
01-31-2006, 06:52 AM
#369
Tech Rookie
hello n stuff
Hi all i am new here but i thought i would post as i have viewed this thread many times now.
I have a sts d28m in my thunder tiger eb4 buggy and all i can say is wow !!
for the cash its by far the best value motor ive ever used and the performance is great too
Since i keep reading about people asking for carb settings i thought i would let you guys know my motor runs at 1.5 turns on hsn 4 turns on lsn i think the settings have a lot to do with alltitude , outside temprature and the glow plug used so the settings given on here should be used as a guide as everyones settings will differ slightly.
anyway i though i would thank everyone who has contrubuted to this thread as it made my life a lot easier when i needed info on settings etc
cheers
r0x
I have a sts d28m in my thunder tiger eb4 buggy and all i can say is wow !!
for the cash its by far the best value motor ive ever used and the performance is great too
Since i keep reading about people asking for carb settings i thought i would let you guys know my motor runs at 1.5 turns on hsn 4 turns on lsn i think the settings have a lot to do with alltitude , outside temprature and the glow plug used so the settings given on here should be used as a guide as everyones settings will differ slightly.
anyway i though i would thank everyone who has contrubuted to this thread as it made my life a lot easier when i needed info on settings etc
cheers
r0x
01-31-2006, 07:08 PM
#370
Tech Initiate
Hello all!!
Ready to break in this monster soon, so I wanna see what plugs you all are running (pre and post break in). The LHS recommanded the OS 8 plug, a great all around plug they said.
I am in HK and the weather is about +/- 20C (+/- 70F) with 80%-85% humidity (I know....ewwww).
Cheers~
Ready to break in this monster soon, so I wanna see what plugs you all are running (pre and post break in). The LHS recommanded the OS 8 plug, a great all around plug they said.
I am in HK and the weather is about +/- 20C (+/- 70F) with 80%-85% humidity (I know....ewwww).
Cheers~
02-04-2006, 07:54 AM
#372
Tech Rookie
Hi
i think the manual states use a hot plug when running very rich settings i used OS A3 plugs and it ran fine
os8 should be ok too though
Doug
i think the manual states use a hot plug when running very rich settings i used OS A3 plugs and it ran fine
os8 should be ok too though
Doug
02-06-2006, 02:38 PM
#373
Tech Rookie
savage with STS .28
I have a hopped up savage with a Mach .28 but I want to upgrade to the STS .28. After reading your reports makes me want to order one today. But, can my Savage handle the power? Also what do you reccomend that I super hop up? I am certain I will order one soon. Any help would be apprechated. Thanks guys.
02-07-2006, 09:55 AM
#374
Tech Rookie
am i the only one with a aftermarket head on my sts .28? i have not read anything on here about anyone swapping there sts cooling head for an aftermarket product
r0x
r0x
, but no glow plug 