Team Associated TC6 Thread
#6751
Tech Apprentice
iTrader: (4)
Has anyone tried to mount a VTA body on a TC6? I picked up a used one to run in VTA but the front body posts are way to short to fit the VTA body. Is there something longer that will fit? Im sure I can piece something together, but I just thought Id ask to see if there is something that is an easy bolt on solution for a taller front body post. Its hard to tell how long the posts are looking at pictures n the internet and Im sure someone has already solved this.
Thanks in advance.
Thanks in advance.
#6752
Tech Regular
iTrader: (2)
I use the associated bulkhead shims under the body post to raise it up a bit.
Has anyone tried to mount a VTA body on a TC6? I picked up a used one to run in VTA but the front body posts are way to short to fit the VTA body. Is there something longer that will fit? Im sure I can piece something together, but I just thought Id ask to see if there is something that is an easy bolt on solution for a taller front body post. Its hard to tell how long the posts are looking at pictures n the internet and Im sure someone has already solved this.
Thanks in advance.
Thanks in advance.
#6753
Perfect. Thanks Guys. I ordered set of the HPI posts. They looked the longest and I can always cut them down. The AE posts looked to only be 1 hole longer than the stock posts and I wasn't sure that was enough.
#6756
Tech Regular
iTrader: (8)
TC6.1 Parts
Can anyone help me pls. I want to know the comprehensive list of upgraded parts the tc6.1 has over the tc6 - The petitrc list and the Team Ass. sites don't list the gear diff and outdrives etc. Also did the 3 hole vertical rear diff top brace come out with the tc6.1 or is it a factory aftermarket item?
#6757
Can anyone help me pls. I want to know the comprehensive list of upgraded parts the tc6.1 has over the tc6 - The petitrc list and the Team Ass. sites don't list the gear diff and outdrives etc. Also did the 3 hole vertical rear diff top brace come out with the tc6.1 or is it a factory aftermarket item?
http://www.teamassociated.com/news/a..._TC6.1_FT_Kit/
#6758
88mm chassis
Noticed the stock chassis was narrowed to 88mm. 4mm on each side shaved off? To reduce chassis rub? By Narrowing it does the chassis become more flexible? Thanks
#6759
#6760
Tech Initiate
narrow chassis is not easy to touch the ground when cornering
#6761
Tech Regular
iTrader: (8)
tc6 vs tc6.1
Here is parts list for upgrade to TC6.1 as posted by Associated:
http://www.teamassociated.com/news/a..._TC6.1_FT_Kit/
http://www.teamassociated.com/news/a..._TC6.1_FT_Kit/
The tc6.1 kit comes with these parts in the box - tc6.1 owners please add other parts it comes with
784695 313569 #31356 TC6.1 Front Arms $7.99 January 2012
784695 313576 #31357 TC6.1 Rear Arms $7.99 January 2012
784695 313583 #31358 TC6.1 Caster Blocks $7.99 January 2012
784695 313590 #31359 TC6.1 Rear Hub Carriers $6.99 January 2012
784695 313606 #31360 TC6.1 Steering Block, 1pr. $5.99 January 2012
784695 313613 #31361 TC6.1 Offset Arm Mounts $8.99 January 2012
784695 313620 #31362 TC6.1 Anti-roll Bar Set $27.99 January 2012
784695 313637 #31363 TC6.1 Anti-roll Bar Tube $8.99 January 2012
784695 313644 #31364 TC6.1 Anti-roll Bar Wire, qty 4 $9.99 January 2012
784695 313651 #31365 TC6.1 Anti-roll Bar Mount, qty 4 $3.99 January 2012
784695 313668 #31366 TC6.1 CVA Kit $29.99 January 2012
784695 313675 #31367 TC6.1 CVA Rebuild Kit $6.99 January 2012
784695 313682 #31368 TC6.1 CVA Bone, qty 2 $14.99 January 2012
784695 313699 #31369 TC6.1 CVA Axle, qty 2 $9.99 January 2012
784695 313705 #31370 TC6.1 Axle Crush Tube, qty 4 $3.99 January 2012
Rear Gear Diff
Rear outdrives to suit rear diff
Front solid spool
Front outdrives to suit front spool
Last edited by midse; 05-16-2012 at 05:02 AM. Reason: Update
#6763
#6764
Rick, correct. Between riding curbs and a fast sweeper my car was dragging a lot, and sometimes would catch and spin out, the narrower chassis reduced that. It does flex a bit more so i went back to a regular upper deck (instead of one cutout (front and back) as we usually run. I must thank Dawson and FJ for their help (its always nice to hear what my car does wrong) after a few weeks of heavy testing i was very happy with the car
#6765
Rick, correct. Between riding curbs and a fast sweeper my car was dragging a lot, and sometimes would catch and spin out, the narrower chassis reduced that. It does flex a bit more so i went back to a regular upper deck (instead of one cutout (front and back) as we usually run. I must thank Dawson and FJ for their help (its always nice to hear what my car does wrong) after a few weeks of heavy testing i was very happy with the car