ISO complete race off road vehicles
11-09-2017, 02:33 PM
#1
ISO complete race off road vehicles
Delete
Last edited by cbr713; 12-03-2017 at 05:04 PM.
11-12-2017, 08:58 PM
#2
11-14-2017, 06:33 AM
#7
I have a TLR 22SCT 2.0, as a roller with 2 bodies, and a high speed servo included.
I can include carpet tires or proline primes for high bite clay.
Looking to get $180, PM me if interested. I can send pics
I can include carpet tires or proline primes for high bite clay.
Looking to get $180, PM me if interested. I can send pics
11-14-2017, 10:25 AM
#8
I have a used Mugen MBX7R,with a Ultimate 8 port, Ultimate 2123 pipe (new) hitec servos, a few sets of good used tires, new uncut custom painted body, Spektrum NIB 3.0 radio and used receiver $425 shipped
11-15-2017, 09:05 AM
#10
I have a TLR 8ight E 4.0 race ready for sale, shoot me a pm
11-16-2017, 12:49 PM
#11
Tech Addict
iTrader: (9)
I also have I have a 2 day run old SC10.2 with almost everything to convert to a T4.1/T4.2: from my ebay add...$160 plus shipping.
Associated SC10.2 but built my way. Could be a FT except for the shocks, aluminium wheel nuts and servo mounts and body. 1 day practice 1 other race day RTR SC10 & T4.2 bodies because i can't paint. off brand aluminium servo mounts & horn Avid motor centering kit (carbon version i think, can't remember) Avid adjustable ESC mount, Proline ProSpec pre-assembled shocks , Jconcepts Carvers & Pressure Points in soft(now 2) pair NIP Pressure Points in super soft rear and 1 pair NIP Pressure Points: Now including 1 set med & 1 set soft AKA Handlebars minus foams, rear swaybar kit with all 3 bars, B5/B5m steering link mod , extra trans housing needing new gear diff, carbon A & C rear top hubs (C's are on the truck now), Missing 1 FT battery thumb screw and has alil play in 1 driveshaft. Could use a shorter servo horn as the servo gets alil warm sometimes. Some extra parts as pictured. Built from scratch so it has some mismatched hardware. Started life as an entire T4.1 Carbon kit but built with SC10.2 chassis. Carbon kit included but some carbon parts are used on the truck, all were atleast used for assembly then converted over to SC chassis. aluminium front caster blocks are for flat arms and so is t4.2 body. The carbon kit is missing the battery strap.
PM if interested.
Associated SC10.2 but built my way. Could be a FT except for the shocks, aluminium wheel nuts and servo mounts and body. 1 day practice 1 other race day RTR SC10 & T4.2 bodies because i can't paint. off brand aluminium servo mounts & horn Avid motor centering kit (carbon version i think, can't remember) Avid adjustable ESC mount, Proline ProSpec pre-assembled shocks , Jconcepts Carvers & Pressure Points in soft(now 2) pair NIP Pressure Points in super soft rear and 1 pair NIP Pressure Points: Now including 1 set med & 1 set soft AKA Handlebars minus foams, rear swaybar kit with all 3 bars, B5/B5m steering link mod , extra trans housing needing new gear diff, carbon A & C rear top hubs (C's are on the truck now), Missing 1 FT battery thumb screw and has alil play in 1 driveshaft. Could use a shorter servo horn as the servo gets alil warm sometimes. Some extra parts as pictured. Built from scratch so it has some mismatched hardware. Started life as an entire T4.1 Carbon kit but built with SC10.2 chassis. Carbon kit included but some carbon parts are used on the truck, all were atleast used for assembly then converted over to SC chassis. aluminium front caster blocks are for flat arms and so is t4.2 body. The carbon kit is missing the battery strap.
PM if interested.
Currently Active Users Viewing This Thread: 1 (0 members and 1 guests)
