*** -- Leaving Rc Sale, Everything Has To Go -- ***
#1
Tech Apprentice
Thread Starter
*** -- Leaving Rc Sale, Everything Has To Go -- ***
Team Losi XXX
Standard XXX with many trick hopups. Very well kept, raced, in excellent condition.
Including:
- Trinity blue shock bushings
- threaded shocks all around with kinwald blue shock collars all around
- MIP gold shock shafts up front
- trinity blue anodized motor mount plate
- trinity blue aluminum rear bulkhead
- Lunsford Ti Turnbuckles all around
- RPM ball cups all around
- RPM gear cover
- high-downforce wing
- graphite rear pivot plate
- graphite servo clamp
- MIP shiny CVDs
- lots blue screws
Accessories include:
- tons of tires (all either brand new or with minimal to usable treadwear)
- lots of extra parts and screws (many brand new) including two standard front shocks (built) and a few springs for each shock length
- spare CVDs
ASKING $165 OBO
Schumacher Axis 2
Raced only once, with very minimal nicking on the bottom. Very nice, very fast, very smooth.
Extras include:
- Purple aluminum motor mount
- low-friction belt (front)
- complete schumacher spring set
- comes mounted with Yokomo firms with medium inserts, also includes the standard Schumacher Carpet Dragon tires mounted on the standard rims
ASKING $155 OBO
NOTE: First one to buy a car gets a free rotating car stand by Eagle Racing (cushioned, slot for fan, accessory trays underneath).
Chargers and Accessories (DC)
Novak Rhino
- brand new, used very little, fresh from factory
asking $35 OBO
Tekin BC110L
- new gator clips all around
asking $20 OBO
Eagle Racing 10A Switching Power Supply
- runs VERY nicely, used on ONE race night, brand new with manual sheet and box still spiffy.
- maxes out at 12A
- MINT CONDITION
asking $55 OBO
Electronics
Novak Cyclone
- very well kept, raced, kept nice.
- includes heat sinks
- still have box and stickers (yay!)
asking $55
Hitec HFX
- new internals from factory (not run since)
- cosmetically very clean
- large heatsink (and small, if you're a weight saver)
- rewired with larger gauge deans wire (12 gauge)
asking $30 OBO
Hitec HS-525BB-MG
- metal geared, aluminum splined
- great for buggies or any electric onroad
- 57 oz of torque
asking $20 obo
Airtronics 94737 Coreless Servo
- coreless precision
- 70 oz of torque
- extremely high-speed, perfect for any electric racing
- very new, very clean
asking $45 OBO
Motors
all motors have been VERY well taken care of (lathed regularly with brush changes regularly) in racing situations.
- Birdman Rage Type-R
- Reedy Rage (non rebuildable)
- Trinity P2k Pro
- Reedy MVP
- 2 Trinity Green Machine 3 Pros
ask for motor dyno numbers if you're interested
asking $14 each, or $75 for all
Cosmetically challenged motors
- Matrix P2k (ugly, missing a tab, but runs fine)
- Reedy Rage Type R (strange can-rubbing sound, but runs faaast)
$7 apiece
Batteries
ALL HAVE BEEN REGULARLY DISCHARGED AFTER RACING and BABIED. Charged at 5A (normally) and discharged at 20A on Integy Octane II tray.
- 2 Matched Integy 2400 1.18s 418-419 seconds- asking $25 obo each
- Matched Integy 3000 1.18 532 seconds - asking $30 obo
- Matched Pro-match 2000 1.14 - asking $20
- Matched Team Orion 2000 1.116 - asking $25
- Unmatched 1700 - asking $12
all are straight-soldered and soldered nicely with Matrix Silver battery bars. all are in saddle-pack format.
or, buy them all for $125
NOTE: buy 3 or more batteries/motors and get a free battery/motor case that holds 3 batteries and 3 motors! Also, buy two or more batteries to get a free Deans Battery Jig!
Peripherals
Airtronics Caliber 3PS
- 3 model memory
- predecessor to the M8, extremely nice radio
- FM (duh)
- LCD screen
- includes Novak XXL receiver with crystals
- faults: casing around the LCD is cosmetically challenged (have to examine from closer than 3 ft to notice), an antenna that fits but is not designed for it (silver, not black). it works, but gets glitchy around gas cars or around lots of metal poles. i suggest you purchase the intended black antenna for optimal performance.
to summarize, a cosmetically challenged 3PS with an XXL.
(note: the std Airtronics receiver no longer available)
asking $75 OBO
Xipp X-Mod Lathe
- beautiful black anodized lathe
- ball-bearing tracks
- extra drive belts
- included Midnight slave motor
- carbide bit
asking $50 OBO
BUYER PAYS SHIPPING ON ALL PRODUCTS UNLESS OTHERWISE NEGOTIATED
PLEASE CONTACT ME AT [email protected] FOR MORE INFORMATION OR PM ME HERE
Thanks very much for reading my super-long post. PICTURES COMING SOON!
Standard XXX with many trick hopups. Very well kept, raced, in excellent condition.
Including:
- Trinity blue shock bushings
- threaded shocks all around with kinwald blue shock collars all around
- MIP gold shock shafts up front
- trinity blue anodized motor mount plate
- trinity blue aluminum rear bulkhead
- Lunsford Ti Turnbuckles all around
- RPM ball cups all around
- RPM gear cover
- high-downforce wing
- graphite rear pivot plate
- graphite servo clamp
- MIP shiny CVDs
- lots blue screws
Accessories include:
- tons of tires (all either brand new or with minimal to usable treadwear)
- lots of extra parts and screws (many brand new) including two standard front shocks (built) and a few springs for each shock length
- spare CVDs
ASKING $165 OBO
Schumacher Axis 2
Raced only once, with very minimal nicking on the bottom. Very nice, very fast, very smooth.
Extras include:
- Purple aluminum motor mount
- low-friction belt (front)
- complete schumacher spring set
- comes mounted with Yokomo firms with medium inserts, also includes the standard Schumacher Carpet Dragon tires mounted on the standard rims
ASKING $155 OBO
NOTE: First one to buy a car gets a free rotating car stand by Eagle Racing (cushioned, slot for fan, accessory trays underneath).
Chargers and Accessories (DC)
Novak Rhino
- brand new, used very little, fresh from factory
asking $35 OBO
Tekin BC110L
- new gator clips all around
asking $20 OBO
Eagle Racing 10A Switching Power Supply
- runs VERY nicely, used on ONE race night, brand new with manual sheet and box still spiffy.
- maxes out at 12A
- MINT CONDITION
asking $55 OBO
Electronics
Novak Cyclone
- very well kept, raced, kept nice.
- includes heat sinks
- still have box and stickers (yay!)
asking $55
Hitec HFX
- new internals from factory (not run since)
- cosmetically very clean
- large heatsink (and small, if you're a weight saver)
- rewired with larger gauge deans wire (12 gauge)
asking $30 OBO
Hitec HS-525BB-MG
- metal geared, aluminum splined
- great for buggies or any electric onroad
- 57 oz of torque
asking $20 obo
Airtronics 94737 Coreless Servo
- coreless precision
- 70 oz of torque
- extremely high-speed, perfect for any electric racing
- very new, very clean
asking $45 OBO
Motors
all motors have been VERY well taken care of (lathed regularly with brush changes regularly) in racing situations.
- Birdman Rage Type-R
- Reedy Rage (non rebuildable)
- Trinity P2k Pro
- Reedy MVP
- 2 Trinity Green Machine 3 Pros
ask for motor dyno numbers if you're interested
asking $14 each, or $75 for all
Cosmetically challenged motors
- Matrix P2k (ugly, missing a tab, but runs fine)
- Reedy Rage Type R (strange can-rubbing sound, but runs faaast)
$7 apiece
Batteries
ALL HAVE BEEN REGULARLY DISCHARGED AFTER RACING and BABIED. Charged at 5A (normally) and discharged at 20A on Integy Octane II tray.
- 2 Matched Integy 2400 1.18s 418-419 seconds- asking $25 obo each
- Matched Integy 3000 1.18 532 seconds - asking $30 obo
- Matched Pro-match 2000 1.14 - asking $20
- Matched Team Orion 2000 1.116 - asking $25
- Unmatched 1700 - asking $12
all are straight-soldered and soldered nicely with Matrix Silver battery bars. all are in saddle-pack format.
or, buy them all for $125
NOTE: buy 3 or more batteries/motors and get a free battery/motor case that holds 3 batteries and 3 motors! Also, buy two or more batteries to get a free Deans Battery Jig!
Peripherals
Airtronics Caliber 3PS
- 3 model memory
- predecessor to the M8, extremely nice radio
- FM (duh)
- LCD screen
- includes Novak XXL receiver with crystals
- faults: casing around the LCD is cosmetically challenged (have to examine from closer than 3 ft to notice), an antenna that fits but is not designed for it (silver, not black). it works, but gets glitchy around gas cars or around lots of metal poles. i suggest you purchase the intended black antenna for optimal performance.
to summarize, a cosmetically challenged 3PS with an XXL.
(note: the std Airtronics receiver no longer available)
asking $75 OBO
Xipp X-Mod Lathe
- beautiful black anodized lathe
- ball-bearing tracks
- extra drive belts
- included Midnight slave motor
- carbide bit
asking $50 OBO
BUYER PAYS SHIPPING ON ALL PRODUCTS UNLESS OTHERWISE NEGOTIATED
PLEASE CONTACT ME AT [email protected] FOR MORE INFORMATION OR PM ME HERE
Thanks very much for reading my super-long post. PICTURES COMING SOON!
Last edited by psy87; 09-05-2002 at 09:27 PM.
#2
You have PM
#3
Tech Apprentice
Thread Starter
pictures
here are pictures of every item on there - sorry for the bluriness on some pictures
Axis 2 with Body
Axis 2 with the body on
Bottom of the Axis 2
Axis 2 uncovered
All batteries
Xipp Lathe
Xipp Lathe with box shown
Xipp Lathe with slotter shown
Motors with brushes (included)
Motors with the case
Peripherals
Chargers and Power Supply
XXX with extras
XXX with body on
XXX posing
Bottom of XXX chassis
XXX from the top view
Axis 2 with Body
Axis 2 with the body on
Bottom of the Axis 2
Axis 2 uncovered
All batteries
Xipp Lathe
Xipp Lathe with box shown
Xipp Lathe with slotter shown
Motors with brushes (included)
Motors with the case
Peripherals
Chargers and Power Supply
XXX with extras
XXX with body on
XXX posing
Bottom of XXX chassis
XXX from the top view
#5
Tech Apprentice
Thread Starter
mail
all of you have mail.
#6
Tech Apprentice
cyclone
im interested in your lathe,motors,batteries,cyclone and 525 bb servo email me [email protected]
Last edited by racingking01; 09-02-2002 at 05:48 AM.
#7
I want - 1 Matched Integy 2400 1.18s 418-419 seconds-
#8
Ill give you 30 shipped for the Novak Rhino. Just one question about it. Does it charge both NiCd + NiMH?
#9
#10
Sent you a PM
Let me know........Thanks
#11
Tech Apprentice
Thread Starter
Deal pending on the Rhino..
#13
Tech Apprentice
Thread Starter
Lathe didn't come with an instruction booklet, and it only comes with one carbide bit (stock). Shipping to Australia shouldn't be an issue, because the buyer pays shipping.
Rhino has been sold, 3PS and Cyclone are tentative, all other items currently available.
Rhino has been sold, 3PS and Cyclone are tentative, all other items currently available.
#14
Tech Apprentice
Thread Starter
On a side note, if you are interested in any items please EMAIL ME and don't just drop your email here, makes my life much easier because it's easy for me to miss these posts.
Thanks a lot and take care.
Thanks a lot and take care.
#15
Tech Apprentice
Thread Starter
bump