CEN Matrix TR
#782
ILDRVR, we had a problem with the brake rods binding in the brake arms/eyelets. It wasn’t bad but here’s a picture of how I fixed this. The front brake arm on the bottom is also bent.
#783
Mcran: Thanks that is what I was looking for. I wasn't sure if I was doing something wrong with it.
Thank you
Thank you
#784
Tech Elite
iTrader: (7)
I was going to start with this setup for the local track which is super hard right now, but no blue groove. Its very slick with a tight layout, 130' straight.
Also can someone post the oil equivelent chart that shows what brands equal what, ie:
Mugen 700cps =ASC 60wt=Losi 50wt (<Im just guessing those)
I seen it posted on the grid but cant find it now.
thnx
#785
Tech Champion
iTrader: (4)
Congrats Gene Hickerson. Proud to have you on board and winning the buggy category at the Brazil 1:8 Buggy National Championship with your CEN Matrix.
Congratulation again from us JonehRC.com
Congratulation again from us JonehRC.com
CEN Racing wins the 2007 Brazil 1:8 Buggy National Championship!!!
Resultado Final da Categoria Buggy
Position Car # Name Laps Time Fastest
Lap Average
Lap
1 2 GENE HICKERSON (USA) 130 1h00m16.313 24.996 27.818
2 3 KRIS MOORE (USA) 128 1h00m03.346 24.953 28.151
3 1 HENRIQUE WINIK (SP) 126 1h00m03.998 24.405 28.603
4 4 MARCELLO BELLO (SP) 120 1h00m01.599 25.346 30.013
5 7 FRED ANDRES (SP) 116 1h00m21.188 26.609 31.217
6 5 GIANCARLO TUDISCO (SP) 114 59m51.861 27.340 31.508
7 10 PEDRO THIEME (PR) 95 1h00m01.149 26.078 37.907
8 9 JORGINHO CARVALHO (DF) 92 1h00m08.058 26.904 39.218
9 6 HEITOR NOGUEIRA (SP) 91 1h00m07.462 26.211 39.642
10 8 FRANCISCO JUNIOR (CE) 73 1h00m11.080 26.629 49.467
Fonte: Organização do Brasileiro 2007
Esta notícia foi publicada no COPA INFERNO
http://www.copainferno.com.br
Endereço desta notícia:
http://www.copainferno.com.br/article.php?storyid=1935
Resultado Final da Categoria Buggy
Position Car # Name Laps Time Fastest
Lap Average
Lap
1 2 GENE HICKERSON (USA) 130 1h00m16.313 24.996 27.818
2 3 KRIS MOORE (USA) 128 1h00m03.346 24.953 28.151
3 1 HENRIQUE WINIK (SP) 126 1h00m03.998 24.405 28.603
4 4 MARCELLO BELLO (SP) 120 1h00m01.599 25.346 30.013
5 7 FRED ANDRES (SP) 116 1h00m21.188 26.609 31.217
6 5 GIANCARLO TUDISCO (SP) 114 59m51.861 27.340 31.508
7 10 PEDRO THIEME (PR) 95 1h00m01.149 26.078 37.907
8 9 JORGINHO CARVALHO (DF) 92 1h00m08.058 26.904 39.218
9 6 HEITOR NOGUEIRA (SP) 91 1h00m07.462 26.211 39.642
10 8 FRANCISCO JUNIOR (CE) 73 1h00m11.080 26.629 49.467
Fonte: Organização do Brasileiro 2007
Esta notícia foi publicada no COPA INFERNO
http://www.copainferno.com.br
Endereço desta notícia:
http://www.copainferno.com.br/article.php?storyid=1935
#786
Tech Master
#787
Tech Master
http://www.cenracing.com/race/result.html
In Truggy at the Brazil Nats, 5 of the 10 trucks in the Final were CEN Matrix TR Arena FRE.
In Truggy at the Brazil Nats, 5 of the 10 trucks in the Final were CEN Matrix TR Arena FRE.
#788
Heya Gene...i grabbed a copy of your setup sheet off the cen site, from Mills Pond/smooth-blue groove track and it says 30wt-#2 pistons on the rear.
I was going to start with this setup for the local track which is super hard right now, but no blue groove. Its very slick with a tight layout, 130' straight.
Also can someone post the oil equivelent chart that shows what brands equal what, ie:
Mugen 700cps =ASC 60wt=Losi 50wt (<Im just guessing those)
I seen it posted on the grid but cant find it now.
thnx
I was going to start with this setup for the local track which is super hard right now, but no blue groove. Its very slick with a tight layout, 130' straight.
Also can someone post the oil equivelent chart that shows what brands equal what, ie:
Mugen 700cps =ASC 60wt=Losi 50wt (<Im just guessing those)
I seen it posted on the grid but cant find it now.
thnx
See you in Hell!
http://www.twf8.ws/new/tech/tip/shock.html
#789
5 out of 10!! That is awsome!! Go Cen
#790
Tech Master
#792
Here is my baby...
#793
17mm hex
Guys check out www.customrccars.com they only sell CEN parts, cars, trucks, buggys & truggys at very good prices and took 7 days to get to me in Australia... you can get ya CEN Buggy 17mm hex's for $20[us] for 4 of 'em...
no disrespect to anyone, just helping my fellow CEN freak
no disrespect to anyone, just helping my fellow CEN freak
Last edited by A_Chair_In_Hell; 09-14-2007 at 09:00 PM.
#794
Tech Elite
iTrader: (7)
FYI you can get a complete set of hubs and hex's, with pins for $6.75 (TTR)
http://www.amainhobbies.com/product_...oducts_id/2607
http://www.amainhobbies.com/product_...oducts_id/2607
#795
FYI you can get a complete set of hubs and hex's, with pins for $6.75 (TTR)
http://www.amainhobbies.com/product_...oducts_id/2607
http://www.amainhobbies.com/product_...oducts_id/2607
Last edited by A_Chair_In_Hell; 09-20-2007 at 01:40 AM.