Too many holes in your tire/wheels?
#16
I vent as per how much the foam needs.
#18
#19
This might help a lot of guys out...In the detailed description of our wheels and tire section, it will tell you if there are pre-punched breather holes or not.
#20
#22
Be honest now guys, have you ever tried 4 holes...If not try it.
#24
I have found that 4 work better for me because when one is compressed, (sealed to the ground) having 3 left open disperses the pressure in a more linear fashion.
#26
#27
Yep, and 10 years ago I ran oily 15% heli fuel in my surface rigs because they ran on it... And it was under $10.00 a gallon....Then when I found a forum of people to talk to, that all ended.....I truly do understand.
#28
Tech Champion
iTrader: (17)
LOL I'm no rookie bud. I don't need a forum to create an opinion about things. I've been doing this awhile. I just like as few holes in my tires as possible. Less holes for dirt to get into on the track or water to get into when washing them. If 2 holes will vent the air enough(they do), I'd much rather have that than 4 holes. Anyway, run your tires how you want. 2 holes are perfectly adequate especially with the newer foams that don't vent as much air. I don't think it really matters how many holes you use. I use 2, you use 4. That's cool, but you won't convince me that 4 is better.
#29
It's all good, but you and I both know that you're going to try 4 smallish holes on your very next set.
Just think of me as you're adding those two extra holes.
Just think of me as you're adding those two extra holes.