Picco P7 Evo 2
#182
Registered User
Comparison to V Spec
Anyone with experience using the Picco Evo 2 and the OS V Spec - Please post some impressions.
Thanks!
Thanks!
#183
Have both. OS stock and OS Speed and Jammin JPX21. Same engine.
The Jammin engine is faster than the stock Vspec. It will outlast the stock Vspec.
Jammin very consistent and like the OS is a great race engine.
At the moment I am sticking to both. If I have to choose I'll pick the Speed.
If money is a factor the Jammin is the best choice.
The Jammin engine is faster than the stock Vspec. It will outlast the stock Vspec.
Jammin very consistent and like the OS is a great race engine.
At the moment I am sticking to both. If I have to choose I'll pick the Speed.
If money is a factor the Jammin is the best choice.
#184
Have both. OS stock and OS Speed and Jammin JPX21. Same engine.
The Jammin engine is faster than the stock Vspec. It will outlast the stock Vspec.
Jammin very consistent and like the OS is a great race engine.
At the moment I am sticking to both. If I have to choose I'll pick the Speed.
If money is a factor the Jammin is the best choice.
The Jammin engine is faster than the stock Vspec. It will outlast the stock Vspec.
Jammin very consistent and like the OS is a great race engine.
At the moment I am sticking to both. If I have to choose I'll pick the Speed.
If money is a factor the Jammin is the best choice.
#185
I got a P7R and will race against V-spec powered buggies.. Will let you know how it performance
just give me 2 weeks so I can get everything ready
just give me 2 weeks so I can get everything ready
#186
Tech Rookie
OS plug
hi guys,i tried a os p3 plug and it seems that its leaking a bit.when i tighten the P3 it didn't feel like the picco plug,i mean the picco just bottoms out at the end of the thread while with the OS i felt a soft resistance before the end of the thread.maybe the threading on the plugs are not exactly the same?
#188
Registered User
RC8
Anyone mount up a P7R Evo 2 in an RC8?
Any modifications required? ANy difficulties?
Thanks!
Any modifications required? ANy difficulties?
Thanks!
#189
ezveedub the plugs P7's require are these....Genuine Picco Turbo's are hard to come by...Unless u know of a place ?
http://www.amainhobbies.com/product_...ducts_id/18703
http://www.amainhobbies.com/product_...ducts_id/18705
http://www.amainhobbies.com/product_...ducts_id/18703
http://www.amainhobbies.com/product_...ducts_id/18705
#190
Tech Elite
iTrader: (17)
ezveedub the plugs P7's require are these....Genuine Picco Turbo's are hard to come by...Unless u know of a place ?
http://www.amainhobbies.com/product_...ducts_id/18703
http://www.amainhobbies.com/product_...ducts_id/18705
http://www.amainhobbies.com/product_...ducts_id/18703
http://www.amainhobbies.com/product_...ducts_id/18705
When searching for Picco glowplugs, you have to look under Ofna or Ofna Picco glowplugs.
#191
#193
here it is mounted on a King Headz std mount,17t clutch bell and M2C 4 shoe clutch setup. EFRA 2046pipe and short header. i run the smallest carb insert and it rips!!
Last edited by tim powers; 12-01-2008 at 05:49 PM.
#195
I use a med-hot plug with my P7 and I have no problem keeping pace with ANY motor at my track in VA. This will be my second race season on this motor and it is still strong and as fast as anything on the track. Love my Picco. I did have problems with cooling fins breaking, 5 in all.