I tried that. It screws me up going over jumps. The buggy already has a lawn dart effect going on, lol

I would like it to not push when I give it a little throttle so I can get speed going throughout the turn. I guess maybe try to enter the turn with more speed and use the weight transfer to get it to turn better. idk

You can try 3*of antisquat I tried that last weekend and he car had over steer off power but a lil pushy in high speed sweepers but wasnt to bad.

Idrummerboy13 last person I would listen to is wild cherry !!!

I had 2. went to 0 I will try 3 if I can find the shim tonight

drummer


I advise you to use Brents Grand Prix 8m set-up with the losi BB springs .
The only extra change that we are doing sides the springs is the hand drilled pistons for the rear ...( #3 piston drill with a #55 bit)

also Use JConcept Finisher body with

This is how my ride is set-up right now .....

I'v never had it better ....

This thread is not a soap opera do not make it one

Jason hasse sent me a setUp I'll run

Please share , I want to see that set-up ....

+1

I searched the thread with no luck. I'm assuming the big bore springs will rub on the front shock tower and rear camber link. What are folks using to space them out so they don't rub/hit? Also, what are peeps runnin for a setup with the big bore springs?

The losi BB spring gets real close to the rear camber link, but if you rotate the spring a little it will not rub ...

No spacing needed! I ran on a large medium bite track red front springs 30 weight oil #2 piston and yellow spring 27.5 weight oil #3 piston in the rear and it was great! The silver front springs and pink rear may suit a higher bite track? They didn't work at all for me! Chassis pushed with no rear traction. For you on a medium bite track to keep in mind.

Chill out man! No more bickering or both of you will have a break from RCTech! Back on topic!

i just asked him if he minded I will post if he doesnt mind.

What kinda diff fluid is recommended for a ball diff in a b4.1? any specific weight? im gonna build a diff I found tonite.

tom you noob, we don't use diff fluid in our BALL DIFFS. check the electric off road section, there's a guide posted up by racer53 stickied up top that should help you out a lot. racing tomorrow?