2011 Intech BR5 Evo
#61
BTW got the shipping information over the weekend and all parts and kits should be in by weeks end.
http://intechracing-usa.com/
http://intechracing-usa.com/
#62
I'd be interested in hearing how that 2090 pipe performs. Is it the real deal with the interchangeable stingers?
Might want to post your feedback on the pipe in the thread bellow. Question was asked but I don't think anyone was running it.
http://www.rctech.net/forum/offroad-...2090-pipe.html
#63
Just wanted to post up details of how my weekend went here in the UK.
When i started using this car 2 weeks ago the guys i usually could beat were on the same pace.
Ive now tried every setup change on the car over the past 2 weeks and have improved it so much its unreal.
This weekend i set TQ both on the saturday meeting and sunday meeting.
On the saturday i went out in 1st and gained a lap lead over second place but found my fuel tank has split and ran out of fuel in 3 minutes after my 1st stop. So gutted there.
On the sunday started off from pole and managed to get upto 2 laps lead before coming into a problem with the rear bevel gear i believe but still ended up in 5th place.
But good result i think
When i started using this car 2 weeks ago the guys i usually could beat were on the same pace.
Ive now tried every setup change on the car over the past 2 weeks and have improved it so much its unreal.
This weekend i set TQ both on the saturday meeting and sunday meeting.
On the saturday i went out in 1st and gained a lap lead over second place but found my fuel tank has split and ran out of fuel in 3 minutes after my 1st stop. So gutted there.
On the sunday started off from pole and managed to get upto 2 laps lead before coming into a problem with the rear bevel gear i believe but still ended up in 5th place.
But good result i think
#64
Hunter is at the 3.5 gallon mark and no issues.
All I have done is clutch bell bearings, changed shock and diff oils, still running stock bearings!
I always replace chassis bearings every gallon on every other car he has ever raced!
Just been trying to push the limits on it....
But it sounds like you are making forward progress on your set ups!!
All I have done is clutch bell bearings, changed shock and diff oils, still running stock bearings!
I always replace chassis bearings every gallon on every other car he has ever raced!
Just been trying to push the limits on it....
But it sounds like you are making forward progress on your set ups!!
#65
OP items
#67
#69
Diff Gearing
Hey Russ,
I was looking at Hunters set-up, and noticed 43T/10T (straight) 46T/13T(S/C-B) yet in the parts listing at NGD, I see the 12T only with stock 40T, I believe . I am assuming this is an option gearing. Which gearing comes with the lastest kit coming.
My last buggy, I was using the 43T/10T (spiral) along with 46T/16T (S/C-B) and really liked the acceleration. only thing was the wear in the spiral cut and took lots of readjusting after several races.
Too much time on my hands thinking before the arrival, LOL
I was looking at Hunters set-up, and noticed 43T/10T (straight) 46T/13T(S/C-B) yet in the parts listing at NGD, I see the 12T only with stock 40T, I believe . I am assuming this is an option gearing. Which gearing comes with the lastest kit coming.
My last buggy, I was using the 43T/10T (spiral) along with 46T/16T (S/C-B) and really liked the acceleration. only thing was the wear in the spiral cut and took lots of readjusting after several races.
Too much time on my hands thinking before the arrival, LOL
#71
#73
#75