RC10B4.1 FT/WC
09-06-2011 | 12:08 PM
#5716
speaking of motors, how much quicker is the 9,5 compared to a 10.5? i would like to try mod class without switching motor i would just power it down by epa and boost to a 13.5 about. lrp x12 or reedy?
09-06-2011 | 04:53 PM
#5719
Tech Regular
Joined: Mar 2011
Posts: 304
From: York
Turns refers to the assembly. Performance is more of a kv thing.
09-06-2011 | 08:56 PM
#5720
Hi Guys - I just bought a b4.1 limo chassis and I was wondering what a good setup would be. I run clay indoor that can at times be a little loose (San Diego Rc raceway)
I apologize for the lazy post - dont have time to hunt through the thread to see if this has already been posted
I apologize for the lazy post - dont have time to hunt through the thread to see if this has already been posted
09-06-2011 | 09:22 PM
#5721
I run the Reedy Sonic 8.5 and it so beyond smooth, no problems with rocks or dust.
haha!!!!!!!!!!!!
09-07-2011 | 05:45 AM
#5722
Tech Regular
Joined: Jun 2011
Posts: 310
From: Deerfield Beach Florida
Associated Wheel nuts
Team Associated is either a smart company, doesn't care about common parts or hasn't a clue.
I wanted to buy a couple of spare front/ rear wheel nuts just in case I was changing a wheel and I dropped a nut in the grass and lost it. Without the nut or a spare, it would be impossible to run the B4.1.
I have gone to Home Depot, Lowe's, Ace Hardware looking for part number 6629 which is the front fiber locking nuts. Not carried in any of these stores. Called a business that deals only in hardware, no luck there. Found the rear size though.
Finally ordered the front wheel nuts from an online parts store and they are now on the way.
I realize the car parts that are unique to these vehicles must be ordered from the manufacturer or parts seller, but why would a company make a car where such common retainers are made in odd-ball hard to get sizes?
I wanted to buy a couple of spare front/ rear wheel nuts just in case I was changing a wheel and I dropped a nut in the grass and lost it. Without the nut or a spare, it would be impossible to run the B4.1.
I have gone to Home Depot, Lowe's, Ace Hardware looking for part number 6629 which is the front fiber locking nuts. Not carried in any of these stores. Called a business that deals only in hardware, no luck there. Found the rear size though.
Finally ordered the front wheel nuts from an online parts store and they are now on the way.
I realize the car parts that are unique to these vehicles must be ordered from the manufacturer or parts seller, but why would a company make a car where such common retainers are made in odd-ball hard to get sizes?
09-07-2011 | 07:45 AM
#5724
Tech Regular
Joined: Mar 2011
Posts: 272
From: Sacramento,CA USA
09-07-2011 | 07:56 AM
#5726
Team Associated is either a smart company, doesn't care about common parts or hasn't a clue.
I wanted to buy a couple of spare front/ rear wheel nuts just in case I was changing a wheel and I dropped a nut in the grass and lost it. Without the nut or a spare, it would be impossible to run the B4.1.
I have gone to Home Depot, Lowe's, Ace Hardware looking for part number 6629 which is the front fiber locking nuts. Not carried in any of these stores. Called a business that deals only in hardware, no luck there. Found the rear size though.
Finally ordered the front wheel nuts from an online parts store and they are now on the way.
I realize the car parts that are unique to these vehicles must be ordered from the manufacturer or parts seller, but why would a company make a car where such common retainers are made in odd-ball hard to get sizes?
I wanted to buy a couple of spare front/ rear wheel nuts just in case I was changing a wheel and I dropped a nut in the grass and lost it. Without the nut or a spare, it would be impossible to run the B4.1.
I have gone to Home Depot, Lowe's, Ace Hardware looking for part number 6629 which is the front fiber locking nuts. Not carried in any of these stores. Called a business that deals only in hardware, no luck there. Found the rear size though.
Finally ordered the front wheel nuts from an online parts store and they are now on the way.
I realize the car parts that are unique to these vehicles must be ordered from the manufacturer or parts seller, but why would a company make a car where such common retainers are made in odd-ball hard to get sizes?
09-07-2011 | 08:17 AM
#5728
Tech Fanatic
iTrader: (13)
Joined: Feb 2005
Posts: 933
From: Mobile, AL
09-07-2011 | 08:54 AM
#5729
Joined: Nov 2008
Posts: 15,739
From: RIP 'Chopper', 4/18/13 miss you bud:(
