Thanks Kraig..makes sense I guess..

Ok, started on my "L" chassis...

CNC's are the best!

Looks like 10.95mm. Hope that .15mm doesn't hurt me. LOL...

If anyone wants to see the rest of the chassis assembly just let me know.
I'm taking pics along the way.

I'm thinking about making these available to anyone who still want to finish their own. I don't really have the desire to finish them. Pm about that if you are.

Those will glue up really nice! GOOD JOB!

price?

$30.00 shipped with your supplied chassis.

That's just cutting and shipping back.

Looks good shooter!

Got a buddy with a water jet cutting one ....

damn thats the ticket.

they look great...... awesome job. I wish I had access to a cnc.

old school for me. hack saw and sanding block.

post the rest of your build pics, could be valuable ideas for others.

VERY VERY nice!!! You're going to be busy!! Will it ship back as pictured, still in one piece? That would be fine with me..

earlier someone mentioned that the 2 turns out on the rod ends for the shocks are if you use the outside hole. Is that anytime you use the outside hole on the bottom or on the top... Does that mean the kit setup using the middle top and outside bottom should use the two turns out?

Ok so you have motivated me to step up my mod of the chassis

I have found a company here in singapore that have cnc/waterjet machines. they are doing mine on monday for me.

thanks

Not with the kit setup. Build it exactly as described in the manual for the kit setup.

The reference to 2 turns is when you are running a setup that uses the inner hole and you want to try the outer hole. If you do nothing else but move the shock you are actually making 2 changes. You are adjusting the angle of the shock and reducing the downtravel (droop). If you want the angle change without the downtravel change you can rebuild the shock and remove spacers or loosen the shock end to get the desired downtravel.

well since the 22t is out hopefully stadium makes a comeback! Come on AE! your falling behind!

We can only hope they are, or have been working on something new in the buggy or truck class...

Ae for life...

dont really need a new car... just need people to run the class