RC10B4.1 FT/WC
08-03-2011 | 11:19 AM
#4576
I am trying the Kyosho black springs in the rear and the preload collar has run out of threads trying to achieve 24mm. The ride height is 23-23mm when the threads run out. any suggestions? I put the yellow K springs on and was able to get the 24mm ride height with a few threads to spare since it is a stiffer spring.
08-03-2011 | 11:22 AM
#4577
I am trying the Kyosho black springs in the rear and the preload collar has run out of threads trying to achieve 24mm. The ride height is 23-23mm when the threads run out. any suggestions? I put the yellow K springs on and was able to get the 24mm ride height with a few threads to spare since it is a stiffer spring.
08-03-2011 | 12:40 PM
#4581
Registered User
iTrader: (4)
Joined: Feb 2011
Posts: 411
From: Mesa, AZ
I was told that the chassis used at worlds were the older t4 plastic because that is what they had in stock at the time. I am not sure whether the Ryan's used this or not but I know that Brent did.
The b4.1/t4.1 plastic is more flexible than the original. I only said that it seemed like it was the same because i thought enough time had passes to cycle through all of the older plastic chassis and be replaced with the .1 plastics. All of the truck chassis that i have bought / ordered are still the older plastic.
The b4.1/t4.1 plastic is more flexible than the original. I only said that it seemed like it was the same because i thought enough time had passes to cycle through all of the older plastic chassis and be replaced with the .1 plastics. All of the truck chassis that i have bought / ordered are still the older plastic.
08-03-2011 | 01:14 PM
#4582
My B4.1 turned out to be a lot better than I thought, in its second weekend still running the kit tires on the front I managed a 3rd in the A-main out of 16 Buggy racers while posting my best time ever and I am not even a very good offroad racer, I prefer 1/12 scale onroad. Good job Team Associated. 
----
----
08-03-2011 | 01:17 PM
#4583
My B4.1 turned out to be a lot better than I thought, in its second weekend still running the kit tires on the front I managed a 3rd in the A-main out of 16 Buggy racers while posting my best time ever and I am not even a very good offroad racer, I prefer 1/12 scale onroad. Good job Team Associated. ----
----
08-03-2011 | 01:17 PM
#4584
Just got the chassis, it has a mold plug but is the regular plastic t4.1 chassis. There are to lines in the middle which can very likley be the cutting lines cav and the sponsors have been doing, I will show pictures
08-03-2011 | 01:29 PM
#4585
The B4 is still better than that silly aluminum slab Losi bolted to the bottom of an otherwise perfectly good car. And I once seriously thought about buying a 22, now as I watch their nose wash out in the corners I think I made the right decision.
08-03-2011 | 02:49 PM
#4586
Tech Addict
iTrader: (2)
Joined: Aug 2001
Posts: 573
From: Daytona Beach FL
For immediate release –
Illuzion - B4.1 +8mm Finnisher worlds body w/ 6.5" Hi-Clearance wing
Part # - 0212
UPC Code – 845937006196
Retail price – $23.00
(Fits Team Associated B4.1 and B4 models with custom extended +8mm chassis)
JConcepts hit the ground in Vaasa, Finland with an all new body design specifically for the IFMAR World Championships. Cleverly named, Finnisher, the unique design quickly rose to the top of the field during competition and proved effective on the ground and in the air. Designed with aspects learned from the Punisher line of bodies, the Finnisher provides an even more aggressive look with included details which remain crucial to performance. The +8mm B4.1 Finnisher body is a drop fit for a popular and World Championship winning modification to the length to the Associated B4.1 buggy.
Illuzion - B4.1 +8mm Finnisher worlds body w/ 6.5" Hi-Clearance wing
Part # - 0212
UPC Code – 845937006196
Retail price – $23.00
(Fits Team Associated B4.1 and B4 models with custom extended +8mm chassis)
JConcepts hit the ground in Vaasa, Finland with an all new body design specifically for the IFMAR World Championships. Cleverly named, Finnisher, the unique design quickly rose to the top of the field during competition and proved effective on the ground and in the air. Designed with aspects learned from the Punisher line of bodies, the Finnisher provides an even more aggressive look with included details which remain crucial to performance. The +8mm B4.1 Finnisher body is a drop fit for a popular and World Championship winning modification to the length to the Associated B4.1 buggy.
